Suchen:

Art: Beiträge; Benutzer: AZfishkeeper

Seite 1 von 2 1 2

Suchen: Die Suche dauerte 0,00 Sekunden; generiert vor 39 Minute(n).

  1. Thanks

    Thanks
  2. I’ve never gone all the way to the 120min mark so...

    I’ve never gone all the way to the 120min mark so not sure if it actually restarts. But yes, the display is most defiantly not counting down while the screen locks.

    Since my Screen lock is set to...
  3. Maintenance timers not accurate at all.

    When I start a maintenance mode on the IOS app the timer begins. I go to do the work.. when I return to the App the timer has only counted down a couple minutes.

    For instance I start a 120 min...
  4. Thank you.

    Thank you.
  5. Thanks for the reply... So what your saying is it...

    Thanks for the reply... So what your saying is it combines the delay times of the two gates as well? The 300s and the 180s...
  6. Flow sensor fittings that are the size of the flow sensors.

    I have the 9000 L/H flow sensors. The inside diameter of the through pipe is 32mm. However the only pipe adapters/union fittings I can get to fit it are 3/4” or 25mm. This sensor needs 32mm or 1”...
  7. @vinny Yup, sure enough there it is in Black,...

    @vinny
    Yup, sure enough there it is in Black, Blue and white in my manual.. Still.. gotta ask something.

    I already have Programmable Logic assigned to the socket for a feed delay. Am I correct...
  8. Is your doser getting power? Check the Y cable...

    Is your doser getting power? Check the Y cable and make sure it’s powered up. I couldn’t see my Doser in the Profilux list and I found my Y adapter wasn’t working.

    You can see the GHL logo on top...
  9. Delay socket restarts after maintenance modes?

    With feed mode I was able to set up socket delays on my ATO and Skimmer. ( thanks to Vinny)

    However maintenance mode seem like it just kills the sockets and then turns them back on when ended. I...
  10. Thanks

    Thanks
  11. Dashboard style charts and graphs in GCC

    I would like to see charts and graphs as well as other similar functions from the IOS App in GCC. Also Quick push buttons to go into maintenance or feed modes while in GCC.
  12. Waste water tubing length and depth in container?

    All the lines have allot of detail on length and placement. However the Waste Water line and placement inside the waste container are not talked about.

    Would it be ok to have the waste water...
  13. Antworten
    24
    Hits
    7.078

    Rumor mill says that Reef A Palooza in Chicago...

    Rumor mill says that Reef A Palooza in Chicago might see an announcement.
  14. Antworten
    4
    Hits
    637

    I actually got this figured out. I had to watch a...

    I actually got this figured out. I had to watch a video on setting up feed mode... once I had that set up your directions worked great. Also set up a similar routine for my skimmer to come on after...
  15. Antworten
    4
    Hits
    637

    I set tried to set this up and had a problem....

    I set tried to set this up and had a problem. When I hit save the socket shut off and would not turn back on.

    Also in the first steps “(select filter number)” what do you mean? I see there are...
  16. Antworten
    4
    Hits
    637

    Thank you sir, I’ll get this set up tomorrow!

    Thank you sir, I’ll get this set up tomorrow!
  17. Antworten
    4
    Hits
    637

    Feed mode with a socket on a timer.

    I’m trying to figure out a way to set up a socket on a timer when: Either I turn feed-mode off, or the feed-mode ends and everything turns on.

    Here’s what my issue is. I have a separate ATO system...
  18. Unfortunately it would not be straight and level....

    Unfortunately it would not be straight and level. The storage tank for the fresh saltwater would be in my garage. The water has to go from that up to the ceiling/attic(2.5-3M up), across the attic...
  19. Maxi Doser questions for Auto Water changes

    I'm in the process of setting up my Auto Water change station. I have to move water about 15 meters from my mixing station to my tank. Then I have to move the water from my tank to a nearby drain (15...
  20. Good job, thanks for posting the follow up. This...

    Good job, thanks for posting the follow up. This could be useful for me in the future.
  21. Thank you and I understand. However I wrote...

    Thank you and I understand. However I wrote several military guides and technical manuals in the past. We had to break instruction down to the lowest level possible. Just my perspective.
  22. Profilux 4 resource guide error/omission found.

    During the REDOX probe calibration I found it omits the step to reconnect the probe. I’m pretty sure the probe needs to be reconnected after step 7 but the steps omit the reconnection of it and...
  23. Antworten
    1
    Hits
    1.136

    KH director Reagent questions

    How much reagent comes with the KH director?
    What’s the average usage of the reagent over a year?
    Can another companies reagent work if GHLs reagent isn’t available?
    What's the shelf life of the...
  24. 90 degree plug and computer style plug and socket on Powerbars. US-Canada style

    I would like to see the US/Canada Powerbar 6e come with a 90 degree male plug on it. Also on the Powerbar side it would be nice to have the 3 prong computer powersupply style socket. But at the very...
  25. Antworten
    1
    Hits
    945

    A single powersupply for All.

    How about a powersupply that all the boxes can plug into? 1 cord, to plug into 1 outlet.

    Essentially, plug the Profilux, KH director, Ion Director, 2 4 pump standard dosers with room for a 3rd. I...
Zeige Ergebnis 1 bis 25 von 37
Seite 1 von 2 1 2