Suchen:

Art: Beiträge; Benutzer: Vinny

Seite 1 von 20 1 2 3 4

Suchen: Die Suche dauerte 0,02 Sekunden.

  1. Antworten
    2
    Hits
    173

    Hello Brock, If this is still giving you...

    Hello Brock,

    If this is still giving you trouble.
    Please create a support ticket so we can assist further.
  2. Antworten
    1
    Hits
    100

    Hi Scott, Give this a try... 1. Go to pH...

    Hi Scott,

    Give this a try...

    1. Go to pH probe settings page and set the desired pH value in Nominal value

    2. Go to the Programmable Logic settings page, select an unused gate, set the...
  3. Antworten
    4
    Hits
    100

    You can do this using 2 Programmable Logic...

    You can do this using 2 Programmable Logic commands.

    Here’s how to create a delayed ON reaction for a feed pause:

    CREATE THE 1ST PL FUNCTION: Maintenance mode delay
    1. Go to the PROGRAMMABLE...
  4. As long as the pumps are correctly calibrated and...

    As long as the pumps are correctly calibrated and dosing schedule is set, the pumps will dispense the exact requested amounts. If you ask it to dose 10ml, 5 times per day, it will do exactly that.
  5. Antworten
    5
    Hits
    461

    The probe in the ice bath should show a value of...

    The probe in the ice bath should show a value of 0° C or 32° F.
    The results will show you if the displayed values when in reef temperatures were "off" or not.

    If the probe begins to deviate again...
  6. If the other USB cables were not universal (meant...

    If the other USB cables were not universal (meant for printers, drives, etc.), it may cause Windows to load the incorrect driver.

    As long as the proper GHL driver was installed, device manager...
  7. Antworten
    4
    Hits
    432

    Please open a support ticket so we can further...

    Please open a support ticket so we can further assist.
  8. Antworten
    1
    Hits
    389

    1. Check WiFi firmware version and update if you...

    1. Check WiFi firmware version and update if you are not on version 7078.
    2. After update, check signal strength of P4 to your network.
  9. Antworten
    5
    Hits
    461

    Perhaps the probe has reached end of life. Have...

    Perhaps the probe has reached end of life.
    Have you tried a new probe or putting it in an ice bath? If yes, what were the results?
  10. Antworten
    1
    Hits
    534

    Hi there, The Vortech controller does not...

    Hi there,

    The Vortech controller does not require an update to continue operating.
  11. Antworten
    1
    Hits
    638

    Hello, This error happens if the correct COM...

    Hello,

    This error happens if the correct COM port number for the USBVCOM driver was not selected.
    Steps for updating the D2.1 SA firmware can be viewed here:
    ...
  12. Antworten
    2
    Hits
    442

    15 meter (50ft) is at the max recommended limits....

    15 meter (50ft) is at the max recommended limits. As long as it can be a straight horizontal shot 50 feet across, it should work.
  13. Antworten
    4
    Hits
    540

    Please open a support ticket so we can assist...

    Please open a support ticket so we can assist further.
  14. Antworten
    1
    Hits
    460

    Hi, 1. 500ml 2. 1-3ml reagent used per...

    Hi,

    1. 500ml

    2. 1-3ml reagent used per test, how long a bottle may last will depend on tests/per day and actual KH value. A 500ml bottle may last up to 3 months if testing 2x/day at a value of...
  15. Antworten
    3
    Hits
    423

    Hi, Yes, you can run the 2.0 SA as a slave...

    Hi,

    Yes, you can run the 2.0 SA as a slave doser.
    Just make sure this doser is running on the newest firmware before proceeding any further.

    In order to convert this doser to "Slave" mode, you...
  16. We appreciate the input. It'll be considered for...

    We appreciate the input.
    It'll be considered for the next resource guide revision.
  17. Hi, Thanks for the tip. Since this process is...

    Hi,

    Thanks for the tip.
    Since this process is specific to the redox probe, the user will presumably reconnect the probe to the port after finishing with the null plug calibration. Otherwise, it's...
  18. Antworten
    4
    Hits
    540

    There are no known issues with the Powerbar6D...

    There are no known issues with the Powerbar6D working on a P4.
    Are you using the original cables?
    Have you tried swapping the cables?
  19. Thema: Setup problem

    von Vinny
    Antworten
    2
    Hits
    500

    Hello Christer, Have you powered OFF the P4,...

    Hello Christer,

    Have you powered OFF the P4, then turned it back ON?
    How far from the ProfiLux is the device you are using to connect with?
    What is the actual firmware running on the P4?
    What...
  20. Antworten
    2
    Hits
    929

    Hi, Cloud access with LX6 series lamps are not...

    Hi,

    Cloud access with LX6 series lamps are not possible due to hardware limitations.
    This is a feature available only on the LX7 fixtures.
  21. Antworten
    1
    Hits
    373

    Any acrylic containers or bottles should work...

    Any acrylic containers or bottles should work just fine.
    The movement won't be silent due to the friction of the stir pill and bottom of the container.
  22. Antworten
    2
    Hits
    390

    Craig, If you are seeing 7.1 while the probe...

    Craig,

    If you are seeing 7.1 while the probe is sitting in pH4 solution, please recalibrate and test again.
    An acceptable deviation is +/- 0.1
  23. Antworten
    2
    Hits
    402

    It is possible the wrong power supply is being...

    It is possible the wrong power supply is being used, please check to see that you are using a 24V PSU.

    For further support, please open a ticket:...
  24. Antworten
    2
    Hits
    442

    Hello Christer, Just to add to what Pit...

    Hello Christer,

    Just to add to what Pit said...

    1. The ProfiLux 4 supports having multiple pH probes connected to it. In order to add a 2nd pH probe, you will need an expansion card that comes...
  25. Thema: Doser 2

    von Vinny
    Antworten
    7
    Hits
    610

    We will need more information to better assist...

    We will need more information to better assist you.


    Did you connect via the app to see what is causing the alarm?
    The app gives you this information.

    Did you go through each dosing channel...
Zeige Ergebnis 1 bis 25 von 500
Seite 1 von 20 1 2 3 4