Suchen:

Art: Beiträge; Benutzer: Vinny

Seite 1 von 20 1 2 3 4

Suchen: Die Suche dauerte 0,02 Sekunden.

  1. Thema: YL2 Cables

    von Vinny
    Antworten
    2
    Hits
    140

    1m is the shortest. Roll the excess cable and...

    1m is the shortest.

    Roll the excess cable and use some zip ties so it cleans up the wiring.
  2. Antworten
    15
    Hits
    1.214

    Open a support ticket for further assistance.

    Open a support ticket for further assistance.
  3. Thema: mitras lx6100hv

    von Vinny
    Antworten
    2
    Hits
    142

    Hello, Please create a support ticket so we...

    Hello,

    Please create a support ticket so we can provide direct assistance.
  4. Antworten
    3
    Hits
    776

    Yes, that feature is planned.

    Yes, that feature is planned.
  5. Antworten
    2
    Hits
    159

    Both modes will be similar when only two pumps...

    Both modes will be similar when only two pumps are used. These differences between these options are more apparent when 3 or more pumps are involved. If you need the two pumps to alternate with each...
  6. Antworten
    2
    Hits
    167

    Hi Erik, Yes it's possible. You can use a...

    Hi Erik,

    Yes it's possible.

    You can use a float or optical sensor as your "Leak detector" when you create a Leakage detection function....
  7. Thema: Tunnel 6105 x 6

    von Vinny
    Antworten
    3
    Hits
    131

    Those ports were never intended to have more than...

    Those ports were never intended to have more than 2 devices connected to them. If you need more L-channels, you can get 1 more port (2 additional channels) with the PLM-2L4S card or 2 more ports (4...
  8. Thema: Tunnel 6105 x 6

    von Vinny
    Antworten
    3
    Hits
    131

    Hi there, Each L-port is intended to run 2...

    Hi there,

    Each L-port is intended to run 2 independent channels. It looks like you're trying to connect 3 pumps to a single port which is incorrect.

    Each port should have a YL2-splitter...
  9. Antworten
    4
    Hits
    321

    Apologies for the delay. The assigned support...

    Apologies for the delay. The assigned support member has been pinged.
  10. Antworten
    2
    Hits
    181

    Hi Ronald, This article shows you how to...

    Hi Ronald,

    This article shows you how to include descriptions for each powerbar socket in your email notification:...
  11. Antworten
    2
    Hits
    215

    Scott, Perhaps the cable from the display has...

    Scott,

    Perhaps the cable from the display has come loose. Check this first.

    If the problem continues, please open a support ticket.
  12. The option will be directly below your pump...

    The option will be directly below your pump information as shown in the how-to article:
    https://www.aquariumcomputer.com/knowledge-base/how-to-setup-vortech-pump-control/

    The missing section for...
  13. In the vortech page's Feed pause, press the blue...

    In the vortech page's Feed pause, press the blue gear icon. You have to choose "OFF" so it tells the pump to turn OFF. Press Apply, then scroll down that vortech page and specify the FP that this...
  14. Once you have told the Vortech which FP it should...

    Once you have told the Vortech which FP it should react to, setup your FP function by following these steps:
    https://www.aquariumcomputer.com/knowledge-base/how-to-setup-feed-pauses-with-profilux/
    ...
  15. Thema: replace ph probe

    von Vinny
    Antworten
    1
    Hits
    154

    No. The probe used by the KHD is specially...

    No.

    The probe used by the KHD is specially designed for the KHD.
  16. A few cm of liquid at the end of the waste water...

    A few cm of liquid at the end of the waste water tube is OK. Anything more than that and the pump head should be recalibrated, preferably using a digital scale for best accuracy.
  17. Antworten
    4
    Hits
    593

    Hello Gary, You can connect to and control the...

    Hello Gary,

    You can connect to and control the doser using the GHL Connect app. This video shows you how to do that:
    ...
  18. Antworten
    4
    Hits
    321

    Eli, Since you already have an open ticket,...

    Eli,

    Since you already have an open ticket, any further questions or update requests should be posted there.
  19. Thema: Measurement Cell

    von Vinny
    Antworten
    3
    Hits
    270

    Yes that is fine.

    Yes that is fine.
  20. Antworten
    2
    Hits
    461

    Yes, that is within the acceptable tolerance....

    Yes, that is within the acceptable tolerance.
    Take an average of those three results and enter that into the Flow rate field.
  21. Antworten
    8
    Hits
    320

    As mentioned above, since you have 2x STDL4-4 you...

    As mentioned above, since you have 2x STDL4-4 you will need an expansion card with an S-port so you can connect a 3rd legacy device.
  22. Antworten
    8
    Hits
    320

    1. Temporarily disconnect the PB6 from the S1-S4...

    1. Temporarily disconnect the PB6 from the S1-S4 port on the ProfiLux
    2. Connect the Gen 1 doser to this S1-S4 port
    3. Connect to the ProfiLux, go to the Switch channels page and select Program...
  23. Antworten
    1
    Hits
    219

    Hi there, If you haven't found the answer yet,...

    Hi there,

    If you haven't found the answer yet, you will find it here:
    https://www.aquariumcomputer.com/knowledge-base/how-to-stop-dosing-when-ph-is-above-x/
  24. Antworten
    9
    Hits
    713

    You need to tell the chart what data to display....

    You need to tell the chart what data to display.
    https://www.aquariumcomputer.com/knowledge-base/how-to-customize-the-ghl-dashboard/

    If the issue persists, open a support ticket for further...
  25. Antworten
    3
    Hits
    182

    Official support is provided during the weekdays....

    Official support is provided during the weekdays.
    From your description it sounds like water damage.

    Open a support ticket for further assistance.
Zeige Ergebnis 1 bis 25 von 500
Seite 1 von 20 1 2 3 4