Suchen:

Art: Beiträge; Benutzer: chema61

Seite 1 von 3 1 2 3

Suchen: Die Suche dauerte 0,00 Sekunden.

  1. Antworten
    2
    Hits
    613

    Thanks a lot Vinny. Actually I have to dismount...

    Thanks a lot Vinny. Actually I have to dismount the fixtures as now they are in two holding rails. I will not forget unplugging them LOL
  2. Antworten
    2
    Hits
    613

    Cleaning of Mitras fixtures

    After quite a time of running the fixtures the fans are noisier than they used to be. Is it recommended to open up the fixtures and clean the fans or is it better to clean them from the outside...
  3. Eventually I could upgrade the wi-fi module. It...

    Eventually I could upgrade the wi-fi module. It seems the upgrade only works with the master fixture and previously I had been trying it with one of the slaves.

    Once I upgraded the wi-fi module I...
  4. Hi Vinny, thank your for your response, but I'm...

    Hi Vinny, thank your for your response, but I'm afraid none of the suggested procedures worked.

    1. I restarted both Windows 8.1 and Parallels once the fixture is shut off and the device manager...
  5. Problems upgrading Mitras firmware and wi-fi module

    I can only connect to Mitras fixtures by using USB connection. I have tried to connect via wi-fi, unsuccessfully.

    Once I checked the firmware version (1.07) and the wi-fi module version (6407) I...
  6. Antworten
    7
    Hits
    1.459

    Thanks a lot. Wish the procedure was simpler....

    Thanks a lot. Wish the procedure was simpler. Updating firmware and Wi-Fi module in three fixtures takes time and increases the chances of something going sideways during the update.
  7. Antworten
    7
    Hits
    1.459

    I have already asked this question about the...

    I have already asked this question about the firmware upgrade. If you want to update the Wi Fi module in a set of master/slaves fixtures, you have to do it in all of them separately?
  8. Antworten
    9
    Hits
    1.458

    OK. I was guessing so, but I wanted to be sure....

    OK. I was guessing so, but I wanted to be sure. Thank you Vinny
  9. Antworten
    9
    Hits
    1.458

    The problem is that I can not fin the original...

    The problem is that I can not fin the original Light Composer file. That's why I was asking if a settings file may be used by Light Composer
  10. Antworten
    2
    Hits
    580

    Thank you very much Thilo.

    Thank you very much Thilo.
  11. Antworten
    9
    Hits
    1.458

    Lighjt Composer and Mitras settings

    The light Composer files have a different extension than the Mitras settings files. Is there anyway to feed Light Composer with Mitras settings? I would light to modify my settings by means of Light...
  12. Antworten
    2
    Hits
    580

    Mitras firmware update: master and slaves

    When you update the firmware of a set of master and slaves Mitras do you need to do it in all fixtures or just the master is enough?
  13. Antworten
    34
    Hits
    26.908

    Related to these questions. If I want to dose Ca...

    Related to these questions. If I want to dose Ca and Mg in a way regulated by the Ion Director, do I need a new doser 2.0 or 2.1, or the old generation dosers are OK?
  14. Antworten
    12
    Hits
    2.554

    There is something somehow implicit in your...

    There is something somehow implicit in your observations and that is worrying me. If the speed of the dosing heads depends upon the type of head cover, that may mean that a worn out cover changes the...
  15. Antworten
    12
    Hits
    2.554

    Hi Vinny, there is something I don't quite...

    Hi Vinny, there is something I don't quite understand. The pump producing the noise is the internal pump, the one mixing the sample water with the reagent in the internal cell. Can you modify the...
  16. Antworten
    12
    Hits
    2.554

    Yes, I have removed the blue caps several times...

    Yes, I have removed the blue caps several times and adjusted the white cilindres. After doing that the pump works fine for several days and then, suddenly, one day it stops working. However I have...
  17. Antworten
    12
    Hits
    2.554

    Hi Vinny. I'm referring to both. Pumps no 1 and 3...

    Hi Vinny. I'm referring to both. Pumps no 1 and 3 of the doser 2.1 that comes with the KHD and the KHD mixing pump which is making an ugly noise when it starts to run.
  18. Antworten
    12
    Hits
    2.554

    Problems with pumps

    The KH Director is a good tool to measure and control a very important parameter in reef aquaria, such as alkalinity. In general is a well designed monitor, but I have to complain about certain...
  19. Antworten
    3
    Hits
    1.061

    I have had the same problem a couple of times....

    I have had the same problem a couple of times. Doser head 1 (water sample) and loser head 3 (waste water) spin freely but they do not move water. Both times I had to remove the blue caps, move a...
  20. Antworten
    2
    Hits
    714

    Thanks Vinny. Hope it does not take too long.

    Thanks Vinny. Hope it does not take too long.
  21. Antworten
    2
    Hits
    714

    KH Director and Profilux 3.1

    Hi, I would like to ask whether it is posible to start a manual testing under Profilux 3.1 without opening GCC from a computer. Also, is it posible to include the KHD measurement in the messages sent...
  22. I did as suggested and the logo went blue in the...

    I did as suggested and the logo went blue in the standard mode. Great!

    Thanks for all your help Vinny
  23. Hi. I tried the emergency update of firmware and...

    Hi. I tried the emergency update of firmware and it worked nicely. The doser came to life. Afterwards I continued with the installation of KH Director and everything is running smooth now.

    Only...
  24. OK. Thanks a lot. I'll be out a few days but I'll...

    OK. Thanks a lot. I'll be out a few days but I'll try it when I come back. I'll tell you how it came out.
  25. Do you mean that I can try the firmware update...

    Do you mean that I can try the firmware update even if the doser is apparently shut off? I mean, the greenStatus LED is off and the logo is also off.

    Should I begin the firmware update by using...
Zeige Ergebnis 1 bis 25 von 53
Seite 1 von 3 1 2 3