Suchen:

Art: Beiträge; Benutzer: KevinR

Seite 1 von 3 1 2 3

Suchen: Die Suche dauerte 0,00 Sekunden; generiert vor 9 Minute(n).

  1. Glad to help :) If you have multiple pumps in...

    Glad to help :)

    If you have multiple pumps in the same stream group and depending on the mode you choose it is the minimum and maximum time it will remain on the first pump before going to the...
  2. What i have done is put one on each side of the...

    What i have done is put one on each side of the tank.

    I like to use the Sinus Wave on one side with a min and max of 30 and 60. And then use Sequence 1.

    The other option I have done.

    Two...
  3. Antworten
    2
    Hits
    874

    Are you hearing the Click when the test takes...

    Are you hearing the Click when the test takes place? It pretty obvious when the KH is working you will hear a loud click right before or during the time the Reagent pump activates?
  4. Antworten
    1
    Hits
    1.115

    You need to go in and configure the switch ports...

    You need to go in and configure the switch ports on the device :)

    Open up the GHL Connect App

    Click on your Controller

    Click on the hamburger Icon, Menu option in the upper right hand corner...
  5. Antworten
    0
    Hits
    2.812

    Flow Sensor Logic

    Ability to turn off a switch-port if the flow sensor reads 0.
  6. Thema: Probe question

    von KevinR
    Antworten
    3
    Hits
    297

    Thank you!!

    Thank you!!
  7. Thema: Probe question

    von KevinR
    Antworten
    3
    Hits
    297

    Probe question

    I am 99% sure they are but wanted to ask are the probes doubled junction? PH, ORP?

    Thanks
  8. This happened on my Expansion Box 2, right after...

    This happened on my Expansion Box 2, right after I upgraded my P4 to the latest firmware on the expansion box. The ADC2 value is to high, to fix reset this I had to use the GCC desktop software and...
  9. Antworten
    2
    Hits
    389

    On an Iphone to turn off auto updates it is: ...

    On an Iphone to turn off auto updates it is:

    Go through the following steps to turn on automatic updates on iPhone, iPad, or iPod Touch:
    Open the Settings app.
    Swipe up until you find iTunes &...
  10. Antworten
    3
    Hits
    1.142

    Updating the Wifi to the latest version that came...

    Updating the Wifi to the latest version that came out yesterday and the webpage update seem to fix the issue.
  11. Antworten
    5
    Hits
    1.732

    From within the P4 you have a Notifications...

    From within the P4 you have a Notifications Option, and you can set it up to Push you alarms via email and text messaging to your phone, use it all the time. I set up a always message to receive tank...
  12. Antworten
    3
    Hits
    1.142

    Good Morning, Since upgrading the the V...

    Good Morning,

    Since upgrading the the V 1.1.2.0 I am noticing my every two hours tank health message is not longer working. I even gone in and hit test on it and I do not receive the message....
  13. Thema: Conduct sensor

    von KevinR
    Antworten
    11
    Hits
    984

    That worked for me. Even after I did the upgrade...

    That worked for me. Even after I did the upgrade again it failed, but was able to go into the System and reset and Calibrate it.

    Thank you!!!
  14. Thema: Conduct sensor

    von KevinR
    Antworten
    11
    Hits
    984

    He having the same exact issue I am having that I...

    He having the same exact issue I am having that I posted about.

    It does not matter if I place the sensor off my P4 onto the expansion Box, or use a new salinity probe the expansion box will alarm....
  15. Antworten
    1
    Hits
    912

    Sept 26, 2018 - Wifi Module-ESP Update?

    September, 26, 2018: Added webinterface V1.0.9, WiFi-Firmware 6834.

    Is their something we need to look for in this update? Just was not sure if it was performance, features, bugs fix?


    Thank...
  16. Antworten
    20
    Hits
    3.775

    Matthias, Sorry for the delay, it still did...

    Matthias,

    Sorry for the delay, it still did not work, and I ordered another salinity probe and will post the results once it arrives.
  17. Antworten
    20
    Hits
    3.775

    Sorry for the delay, Reverting the code back...

    Sorry for the delay,

    Reverting the code back and the probe works now so it is related to the upgrade?
  18. Antworten
    20
    Hits
    3.775

    want to make sure I do this correctly? You...

    want to make sure I do this correctly?

    You want me to revert back both on the P4 and the Exbox to the previous versions?

    Do You want me to do the Exbox2 First and then the P4? Or do the P4...
  19. Antworten
    20
    Hits
    3.775

    The Expansion Box is right off the P4, less then...

    The Expansion Box is right off the P4, less then 18 inches away. I did replace the cable and it dong the same thing.

    I then went about disconnecting everything, only leaving the Expansion Box and...
  20. Antworten
    20
    Hits
    3.775

    I found the ADC :) Here is my entire probe...

    I found the ADC :)

    Here is my entire probe settings inside GCC Desktop Software.
    11100
  21. Antworten
    20
    Hits
    3.775

    ADC? 11099 I do not have a virtual probe...

    ADC?

    11099

    I do not have a virtual probe for the Cond.(s).
  22. Antworten
    20
    Hits
    3.775

    Below are my Current Firmware levels: P4:...

    Below are my Current Firmware levels:

    P4: V7.16 (Wifi is 6816)
    Expansion Box 2: V2.04
    Both of My Touches show V1.06.
  23. Antworten
    20
    Hits
    3.775

    In the one screen shot the Alarm shows disabled...

    In the one screen shot the Alarm shows disabled and I still receive the alert in V 1.1.1.8

    To revert back, do I a backup of the config as it is today? Or do I restore the config that I had before...
  24. Antworten
    0
    Hits
    186

    Dynamic Value Feature

    In the the "History of Ghl" article referenced this (https://www.aquariumcomputer.com/me...ographic-and-limnological-research-institute/) from the website.

    It talks about using the Dynamic Value...
  25. Antworten
    20
    Hits
    3.775

    Something did break in the V1.1.1.8 software. ...

    Something did break in the V1.1.1.8 software.

    Even after a calibration, the system is still alerting on the salinity probe. I even reseted the Expansion V2 box and the P4.

    As you can see even...
Zeige Ergebnis 1 bis 25 von 69
Seite 1 von 3 1 2 3