Hi,
is it possible to get replacement pcp boards for the 6d plug bar
mine are now 8+ years old, i have a problem with one that stays on,i have change the all relays to clear any sticky relays
but...
Type: Posts; User: Himat
Hi,
is it possible to get replacement pcp boards for the 6d plug bar
mine are now 8+ years old, i have a problem with one that stays on,i have change the all relays to clear any sticky relays
but...
hi
web interface now works
still have issue with GHL control centre unable to save measurement data or display previous stored measurement data
pop up box encountered improper argument.
hi
firmware 6.35
P3ex
having issue with webinterface no data for sensors setting page
and GHL control centre unable to save measurement data or display previous stored measurement data ...
all sorted now
unused pumps needed to be filled
Thank you
Checked all level on containers
All in the green not being empty
Still these same blue /yellow light pluse
Ok yellow for warning
Where do I need to look in mybsetup for this
As I said its indicated on both dosers
HI
doser added to p3ex ok
please explain the lights
on both doser 2.1 and 2 pulse blue and pulse yellow
tried to look for an alarm conditions or level warnings
need some quidance on connecting dosers to p3 eX
At present running ok
P3ex with doser gen1 and standalone doser 2,and doser 2.1
1, how do i go about connecting the stand alone dosers 2 and ...
ok thats normal then
yes they do
any advise
Hi
i have noticed that i am not display all four Pumps in myGHL
in dashboard only three pumps displayed all three are dosing above 1ml
but pump 3 which i have set to dose at 0.1ml dose not...
Hi
As posted earlier have it working at -240 with 10mv hys and working fine between -230 and -250 have not updated firmware as of yet need to do,
not calibrated probe in a while but only...
yes this doses work but if i go into the main control program it reverts to 0mv must be sum bug in the program will try upgading to new version and see what happens
hi
Need some help to set the redox probe to -190mv and 10mv hys . for nitrate reactor and using plug socket to control feed pump and nitrate fluid
I have set the nominal value to -190mv and...
I have figured that the manual dose dosed not dose in 0.1ml incremnts
pumps dose 0.1ml in timed settings
also noted that manual dose dose not dose the correct dose (pumps calibrated and tested...
just tried the above on setting 1 same result will dose 1ml ok but not 0.1 etc
hi
I have tried the above and i have gone to default setting and set the pump calibration all is ok pump spins very slow flow rate set at 5.5
as i have said when i ask to dose 0.1ml ect manual...
All the above done,
I am using silicon 1.5mm bore tubing
If ai try manual dose to dose 0.5ml it does not dose, if maul dose 2ml ok
question how do i dose small amout e.g. 0.3ml
hi
what is the smallest dose possible on doser 2
have the latest firmware/software installed
I have calibrated the pumps on 0 setting and tried to dose 1.5ml and it only doses 1ml
in...
ok that seems to work now.
seem a little slow to load info
thanks
reset cookes and cache reset safari still the same
as screnn shoots7680
7681
7682
HI
I have updated firmware on doser2 and control centre to latest update.
I had problems connecting to myghl.com now i get message all pumps inactive.so my doser is seen but not read the doser...
ok seems to work now
i have updated to new firmware 1.07 for doser 2,
have only managed to get gonected to the cloud via firefox ,
safari and google crome shows doser unit but say not connected,
in fire fox it seems...