Suchen:

Art: Beiträge; Benutzer: Halfmoon

Seite 1 von 8 1 2 3 4

Suchen: Die Suche dauerte 0,01 Sekunden; generiert vor 20 Minute(n).

  1. Antworten
    40
    Hits
    11.622

    I see there is a new GCC out, I'll install and...

    I see there is a new GCC out, I'll install and get a screen shot to see if this was addressed. Don't hold your breath though, out of the "thousands that work" as I was told in pm prompting the above...
  2. Antworten
    7
    Hits
    1.418

    Yes, note the time yours takes from starting to...

    Yes, note the time yours takes from starting to drain to finished filling and adjust for your tank. I think this way the ATO could run for 3 hrs, AFAIK a third sensor would be required to avoid that....
  3. Antworten
    7
    Hits
    1.418

    This is how I have mine, I use two level sensors...

    This is how I have mine, I use two level sensors split on level 1 & 2 from the Profilux. I have max on time set to 3 hrs, 1.5 hrs to empty and 1.5 hrs to refill.
    8326
    8327
    I use Timer 4 to...
  4. Antworten
    7
    Hits
    1.418

    I thought it was fixed here: ...

    I thought it was fixed here: http://forum.aquariumcomputer.com/showthread.php?10861-AWC-with-two-optical-level-sensors

    Did something change? I had trouble reading the screen shots.
  5. Antworten
    40
    Hits
    11.622

    First, my apologies to anyone that was offended...

    First, my apologies to anyone that was offended by my comment, it wasn't intended to offend anyone. It was made out of frustration.

    The correlation between the seasonal lighting and the GHL...
  6. Antworten
    40
    Hits
    11.622

    I've unassigned and reassigned the pumps too many...

    I've unassigned and reassigned the pumps too many times to count, current firmware:
    GCC V1.0.8.4
    Profilux 6.27
    Vortech Controller 1.04
    RFM 1.02
    Controller Interface 1.14

    I don't see the...
  7. Antworten
    40
    Hits
    11.622

    Firmware 6.27 and still doesn't work. But we got...

    Firmware 6.27 and still doesn't work. But we got seasonal lighting?? More fluff like thunderstorms and lightning, please fix the vortech module!
  8. Antworten
    1
    Hits
    1.152

    There should be a check box in the program logic...

    There should be a check box in the program logic to invert the switch, not sure if that firmware supported this.
    8302
  9. Antworten
    12
    Hits
    3.586

    That makes sense, thanks.

    That makes sense, thanks.
  10. Antworten
    12
    Hits
    3.586

    Glad to see you got it working. Could you explain...

    Glad to see you got it working. Could you explain how setting your set point at 2hrs each = a program that runs 1hr on and 2hrs off? I've tried to get this to work in the past and never could,...
  11. Antworten
    25
    Hits
    4.506

    That is my understanding, I would prefer max on...

    That is my understanding, I would prefer max on time being able to be set independently for all three, ATO, drain and fill. May be a way to do that with logic.



    I check my splitter connections...
  12. Antworten
    40
    Hits
    11.622

    For those following I just updated firmware to...

    For those following I just updated firmware to 6.23, still no joy. Maybe the next update will address this issue.
  13. Antworten
    25
    Hits
    4.506

    Vinny, In the screenshot the max on time is 45...

    Vinny,
    In the screenshot the max on time is 45 seconds, I thought this had to be the max time of water change. Could you clarify what this setting is exactly?
  14. Antworten
    25
    Hits
    4.506

    Your max on time in the first screen shot is 30...

    Your max on time in the first screen shot is 30 seconds, this should be the amount of time a complete water change takes. Water change #2 uses the same sensors and isn't necessary.

    ETA: This in...
  15. Antworten
    25
    Hits
    4.506

    The type of switch shouldn't matter, I use a...

    The type of switch shouldn't matter, I use a pressure switch for ATO/ AWC and an Optical for lower level of AWC. Might have to invert the lower level.
    Socket "x" = Fill water ATO only (top off...
  16. Antworten
    12
    Hits
    4.608

    Try this at your own risk! :) G1: Input 1:...

    Try this at your own risk! :)

    G1:
    Input 1: Fillwater 2 (the control circuit of the leak sensor on the Probe/Sensor/Level page)
    Input 2: Always On
    Function: And

    When the leak detector gets...
  17. Antworten
    40
    Hits
    11.622

    Mine doesn't even see my pumps anymore, I'll wait...

    Mine doesn't even see my pumps anymore, I'll wait for the firmware update to do anything with it.
  18. Antworten
    4
    Hits
    1.599

    I have the same serial # problem, my thread is...

    I have the same serial # problem, my thread is here,
  19. Antworten
    4
    Hits
    1.599

    Delete assignments then refresh the screen, pumps...

    Delete assignments then refresh the screen, pumps should be gone now. May have to reboot the Profilux by cycling the power. HTH.
  20. Antworten
    29
    Hits
    8.596

    Interesting, would love to know more.

    Interesting, would love to know more.
  21. Antworten
    40
    Hits
    11.622

    Good to know, thanks for the reply.

    Good to know, thanks for the reply.
  22. Antworten
    40
    Hits
    11.622

    No QD functions.

    No QD functions.
  23. Antworten
    40
    Hits
    11.622

    Now have two QD and the Vortech Controller sees...

    Now have two QD and the Vortech Controller sees nothing. Re-installed firmware 1.04, the controller was the only PAB device attached for this process. I can't re-install the controller interface...
  24. Antworten
    1
    Hits
    818

    Perhaps use "Cyclic"

    Perhaps use "Cyclic"
  25. Antworten
    40
    Hits
    11.622

    Correct

    Correct
Zeige Ergebnis 1 bis 25 von 191
Seite 1 von 8 1 2 3 4