Suchen:

This is something that I have enquired about before as well - could do with it bringing up the list of things to do. Please !!!

Checked Connect APP and My GHL the section is definitely missing.

12756


I would be surprised if it is anything to do with the chip because apart from this problem it is all working OK.
...

I have set both pumps to OFF and saved but when I scroll down the Vortech Page there is nothing where I can specify which feed to react to. I also resaved the assignments

12754

12755

Can...

Hello Vinny and thanks for the reply.
I am afraid I still don't get this
Firstly I assume that whatever you are saying should be applied to both pumps even though Master and slave?
When I go into...

I looking to set up a feed pause that will stop my Ecotech MP10's which are already connected to the Vortech Controller as Master and Slave
I can see there is a Feed Pause setting in the Vortech...

Not a problem always glad to help.

I am not sure whether it was when Apple released IOS 14 or the latest Connect App update but now the App is overlapping the screen at the top and affecting the ability to use the menu button. If I...

Ok thanks Thilo

Firstly there was no alarm message on the display or an Alarm email when the Profilux started flashing Red/Blue.

There was one this morning which like I said appeared overnight and related to the...

I don’t believe it is PAB issue because everything working OK.
Overnight the Profilux as started to show an alarm and now both the Profilux and the slave Doser are flashing alternate red/blue. The...

On my P4 I have an alternate Blue/Red logo warning and on a slave doser, I have alternate Yellow/Blue warning.

In myGHL I have only received one Yellow notification which is for a fill level on my...

Right OK thanks

Now I am back in front of the tank the set up with the two sensors is just not working even having raised the time to 45 minutes it was still alarming out. As you have suggested I will be raising a...

Thanks for clarifying all that. I would suggest that if there are such limits etc on running 2.1 Doser heads then that should have been made clear in the video and in the appropriate literature etc...

It certainly adding far more than normal and in larger quantities which I am not comfortable with and I am concerned that it is possibly affecting parameters.
You know the ATO mode is with two...

I can’t sit in front of the device when I am not there. I have tried 5, 15, 20 and lastly 25 mins and on each occasion it alarms out. You can’t be saying that I need to run the doser over 25 mins...

I am afraid that the use of this ATO control is proving to be a disaster. There is no point me raising a ticket as the main GHL site is saying that tickets will be dealt with on their return from...

OK, thanks - no refugium so not as much of a problem but realise need to keep clean.

OK Thanks hopefully it will be OK.

Presumably, if I want to get more frequent smaller doses in less time then I should go to the ATO with one sensor? Wish I had known that would have saved me the...

Sensor 4 is the optical Sensor and that did react from X to -

Yes Sensor 3 State Direct and State Delayed changed from - to x and the alarm disappeared

Sensor 4 stayed with just X on both

Sorry might being a bit slow here but I can't find anything that will toggle.

Here's another screenshot I have it set to Sensor 3 and 4 using a splitter cable. I assume Sensor 2 is the Leak...

I have looked at that I can't get anything to toggle except the invert switch which is not relevant. Which am I supposed to be toggling?

This is a screenshot of what it is showing the myGHL cloud...

Yes, hopefully, that is the case. I have increased it to 18 minutes to see if that works.

Not sure which switch you mean in the States tab - can you explain a bit further, please.

So having the...

I have just set up my ATO using one of the pumps on my slave 2.1 doser with a pump speed of Fast and after calibration set at 36ml per min.

I have followed the video by using the exact same set up...