Is it possible when programming a software update that when the touch shows measuring for the KH it displays the old KH results until the measuring is completed? I am testing 12 times a day on one...
Type: Posts; User: KevinR
Is it possible when programming a software update that when the touch shows measuring for the KH it displays the old KH results until the measuring is completed? I am testing 12 times a day on one...
Glad to help :)
If you have multiple pumps in the same stream group and depending on the mode you choose it is the minimum and maximum time it will remain on the first pump before going to the...
What i have done is put one on each side of the tank.
I like to use the Sinus Wave on one side with a min and max of 30 and 60. And then use Sequence 1.
The other option I have done.
Two...
Are you hearing the Click when the test takes place? It pretty obvious when the KH is working you will hear a loud click right before or during the time the Reagent pump activates?
You need to go in and configure the switch ports on the device :)
Open up the GHL Connect App
Click on your Controller
Click on the hamburger Icon, Menu option in the upper right hand corner...
Ability to turn off a switch-port if the flow sensor reads 0.
Thank you!!
I am 99% sure they are but wanted to ask are the probes doubled junction? PH, ORP?
Thanks
This happened on my Expansion Box 2, right after I upgraded my P4 to the latest firmware on the expansion box. The ADC2 value is to high, to fix reset this I had to use the GCC desktop software and...
On an Iphone to turn off auto updates it is:
Go through the following steps to turn on automatic updates on iPhone, iPad, or iPod Touch:
Open the Settings app.
Swipe up until you find iTunes &...
Updating the Wifi to the latest version that came out yesterday and the webpage update seem to fix the issue.
From within the P4 you have a Notifications Option, and you can set it up to Push you alarms via email and text messaging to your phone, use it all the time. I set up a always message to receive tank...
Good Morning,
Since upgrading the the V 1.1.2.0 I am noticing my every two hours tank health message is not longer working. I even gone in and hit test on it and I do not receive the message....
That worked for me. Even after I did the upgrade again it failed, but was able to go into the System and reset and Calibrate it.
Thank you!!!
He having the same exact issue I am having that I posted about.
It does not matter if I place the sensor off my P4 onto the expansion Box, or use a new salinity probe the expansion box will alarm....
September, 26, 2018: Added webinterface V1.0.9, WiFi-Firmware 6834.
Is their something we need to look for in this update? Just was not sure if it was performance, features, bugs fix?
Thank...
Matthias,
Sorry for the delay, it still did not work, and I ordered another salinity probe and will post the results once it arrives.
Sorry for the delay,
Reverting the code back and the probe works now so it is related to the upgrade?
want to make sure I do this correctly?
You want me to revert back both on the P4 and the Exbox to the previous versions?
Do You want me to do the Exbox2 First and then the P4? Or do the P4...
The Expansion Box is right off the P4, less then 18 inches away. I did replace the cable and it dong the same thing.
I then went about disconnecting everything, only leaving the Expansion Box and...
I found the ADC :)
Here is my entire probe settings inside GCC Desktop Software.
11100
ADC?
11099
I do not have a virtual probe for the Cond.(s).
Below are my Current Firmware levels:
P4: V7.16 (Wifi is 6816)
Expansion Box 2: V2.04
Both of My Touches show V1.06.
In the one screen shot the Alarm shows disabled and I still receive the alert in V 1.1.1.8
To revert back, do I a backup of the config as it is today? Or do I restore the config that I had before...
In the the "History of Ghl" article referenced this (https://www.aquariumcomputer.com/me...ographic-and-limnological-research-institute/) from the website.
It talks about using the Dynamic Value...