T5 dimming with Profilux Plus II Profiset

Hi everyone!

I have a Profilux Plus II profiset and also a dimmable ballast for 2x 80W T5s (Osram Quicktronic Intelligent) with 1-10V interfaces.

My understanding was that the Profilux Plus II was sufficient to dim this ballast.
If that´s the case, does GHL sell the cable to do the connection from the Profilux (L1-L4) to the ballast? or is there a description of the cable to do one myself?

If not, what else is needed?

Thanks in advance!
Alex

You can take our board EVG-AP-1F (one channel, with internal shut-off, no housing) or our LF-ABOX (one channel, with internal shut-off). For further details please have a look here: http://forum.aquariumcomputer.com/sh...dimmable)-lamp

Hi Carolin,

Thanks for the answer.
I tried to access the link the thread you´re refering to but it´s not working :(
http://aquariumcomputer.com/Download...G-AP2_V400.pdf
Can you please point to the right address?

So from answer, shall I understand that the Profilux computer does not deliver the 1-10V control signal and therefore they have to be adapted with those additional devices. Am I right?

Thanks,
Alex

Use http://support.aquariumcomputer.com/...oad.php?did=80