Printable View
Ok, need some help here
Have a stdl4 Powerbar connected to s1-s4
Have a second stdl4 Powerbar connected to s5-s8
Have a 5.1 Powerbar connected to pab
Then my first doser gen1 is connected to the S-port on the side and works fine
Now I want to connect a second gen1 doser to the first, only I can’t seem to get it working.
Any help on programming and/or connecting would be apreciated (step by step please :) )
Hello,
connect the second doser and program it to the desired numbering, then connect the first doser and program it's numbering, too. Then connect the second doser to the first.
Hi,Quote:
Originally Posted by Thilo
Already tried this, doesn't work
Because I'm only able to change numbering of devices connected to port S1-S8 not for any extra S-ports
and to be able to change the numbering I have to place these ports on digital and then my stdl4's start to act funny
It's connected to a PLM-2L4S expansion card?
Yes, that’s the one ��Quote:
Originally Posted by Thilo
Hello,
have a look at this similar thread; might be helpful: https://forum.aquariumcomputer.com/s...08-Doser-Gen-1
It's not possible to program the Doser over this card. Connect the Dosers to one of the other ports temporarily and program them to the desired numbering there.Quote:
Originally Posted by Coone983