Printable View
trying to add a STDL4-4 to a new system to start to program outlets. It does not show up when i go to the System --> PAB page.
Followed the tutorial here, plugged into 1st red port (1-4)...why is it not showing up?
Want to have STDL4-4 as outlets 1 thru 4 and Powerbar 6E as 5-10
Attachment 12796
For tonight, here's my profilux4 setup.....orange extension cord.
Attachment 12797
the STDL4-4 will not show up because it is not a PAB device.
It will react to the switch channels 1-4.
I connected the STDL4-4 to profilux 4e, not registering outlets, only clicking. Connected to 1st red port (assigned as 1-4).
Video here: https://youtu.be/4c3ThUeRED0
Defective powerbar? PAB outlets 5-10 are working fine.
do you have a profilux 4 or a 4e?
a 4e hase no red port.
a p4 will work.
The LEDs looks like you have set the S Port to digital mode.
You have to set it to analog mode.
We have added a section to our STDL4-4 setup article which covers this very topic:
https://www.aquariumcomputer.com/kno...r-to-profilux/
See Troubleshooting section.