Printable View
I would like to be able to pull ( or use push to file or location) sensor data so that I can insert into my own database and generate historical charts and data points from sensors (temp, ph etc etc).
Is there a method to do such a thing with a profilux 4 ?
Doesn't matter to me if the push/pull is from local controller or My GHL.
Measurement data can be exported in GHL Control Center to a csv-file and can be used in every application with a proper importer.
The internal storage has room for 8000 records. The used storage depends on the measurement period and recorded sensors
and must be downloaded, before the rollover takes place and overwrites the oldest entries.
@MatthiasF - Thank You for your quick response !Quote:
Originally Posted by MatthiasF
@MatthiasF - Could you specify how to interpret that format? Source-id, Source name are naturally clear, but details, value 1 (seems to be measurement value to be divided with 1/10/100 depending on the sensor), value 2 etc... There seems to be no information what these are? I would like to write small importer to R environment to do some statistical analysis.Quote:
Originally Posted by MatthiasF
Value1 is the sensor's current value, Value2, Value3 are filled, when there are more units available.
Details show you the state of the sensor. Anything other than zero means an error reading the sensor data.
Unit: 0 is the 1st unit available, 1 is the 2nd, which means for temperature sensors: [0]==Celsius; [1]==Fahrenheit
Details is used to define the sensor type: TEMP = 1; PH = 2; REDOX = 3; CONDUCTANCE_F = 4; CONDUCTANCE_S = 5;