Printable View
hello,
i'm trying to calibrate all the sensors.
but it don't works.
it says for example the temp "you want to calibrate"i say yes . and than is it finish "would you save"
my temp is 3 deg off
if ill want to calibrate ph . i can say with fluid . and than calibrate . but he is not saying put in fluid 2 .
like something is missing
why can't i calibrating with the ghl control center
please help me.
greetings Huub
It´s not possible to calibrate temp in that way due you don´t have the two needed accurate temperature sources (20°C/30°C) so calibration means in that case "restore factory default)Quote:
it says for example the temp "you want to calibrate"i say yes . and than is it finish "would you save"
Use the temp adjust function in the sensor menu of GCC for thatQuote:
my temp is 3 deg off
However, the sensor is very accurate so you should be absolute sure your referece thermometer is a high class device.
You have to follow the advises. It may take several minutes to calibrate in first solution. After that you are asked to put in the probe in second fluid.Quote:
if ill want to calibrate ph . i can say with fluid . and than calibrate . but he is not saying put in fluid 2 .
If the calibration fails, you should reduce sensor sensivity. If it fails again, sensor should be replaced.
It´s simply not forseen. If you want to perform a calibration, it´s mandatory to be aside the PL in all cases - so calibration at the device is the easiest way.Quote:
why can't i calibrating with the ghl control center
However, you can use the remote control to perform it with GCC
Thx. Everything works
Verstuurd vanaf mijn SM-G900F met Tapatalk