-
Misconfigured powerbar ?
Hi,
I've just added a Powerbar 6E-PAB to my system that has an existing Powerbar 5.1.
both powerbars are connected directly to the profilux4 (one in each PAB socket).
I was expecting (as per the GHL videos on youtube) for the new Powerbar to be assigned S6-S11 but what seems to be happening is that when S5 (my heater activates) then S% on BOTH powerbars is activating.
Have I missed something? so i need to somehow assign the switch channels to the device ?
-
You need to go in and configure the switch ports on the device :)
Open up the GHL Connect App
Click on your Controller
Click on the hamburger Icon, Menu option in the upper right hand corner and choose System Menu Option
Scroll all the way down to the bottom and click on Assign and Configure connected PAB-devices
You should now see a list of assigned devices
Click on the gear next to the Powerbar (the new on you just installed 6E)
On the Start Numbering change it from 1 to 6 :)
Click Save and now your Powerbar will be outlets 6-11
Hope this helps.
I have a quick video on installing a new device via the PAB and configuring it at:
https://youtu.be/f0cyDacUOfk