Hey i am trying to measure but it still zero and the pump of the dirictor dont work, i tried to give it dirict 24 v and it work but at the measurement it dont work. I removed the filter from the tube also.
Sent from my iPhone using Tapatalk
Printable View
Hey i am trying to measure but it still zero and the pump of the dirictor dont work, i tried to give it dirict 24 v and it work but at the measurement it dont work. I removed the filter from the tube also.
Sent from my iPhone using Tapatalk
Can that be because i haven’t Made calibration yet?
Sent from my iPhone using Tapatalk
Yes, you need to calibrate everything first.
Please read the manual and if you have problems, check the FAQs first: https://www.aquariumcomputer.com/support/faqs/
I made calibration today and still have zero number during the measurement and also the pump of the kh director that mixes the liquids don’t work. And it finishes work with the error “titration takes too long”
Sent from my iPhone using Tapatalk
I tried it dont make any noise
Sent from my iPhone using Tapatalk
https://uploads.tapatalk-cdn.com/201...0af7bd3226.jpghttps://uploads.tapatalk-cdn.com/201...177e096884.jpg
Sent from my iPhone using Tapatalk
This is what i see when i start measurement
Sent from my iPhone using Tapatalk
That what i see when it finish
https://uploads.tapatalk-cdn.com/201...258439368f.jpg
Sent from my iPhone using Tapatalk
https://uploads.tapatalk-cdn.com/201...c5036fd78b.jpg
Sent from my iPhone using Tapatalk