LED Lighting for my Discus planted tank

Hello ,
I look for a led lighting for my tank
It's MP Smaragd 460 Liters ( 130 X 60 X 60 cm )
It is planted , with Discus
Currently there are 4 T5 54 w tubes
I think because it is closed it would require "Mitras Lightbar"?
Mitras Lightbar Daylight ?
model 120 ?
Would it fit in?

If so, how much is needed for my tank
And what more is needed to connect them to the Profilux 4?

Thank you in advance for your answers
Best regards, Stephane

Hello Stephane

Quote:

---

I think because it is closed it would require "Mitras Lightbar"?

---

yes

Quote:

---

Mitras Lightbar Daylight ?

---

yes

Quote:

---

model 120 ?

---

no, 130

Quote:

---

Would it fit in?

---

i dont know

I think that 1 Lightbar Daylight 130 is enough. You can easily update if necessary.
You need to connect to a PL4
1 Mitras-LB-PSU200
1 Mitras LB ActiveSplitter Cable
1 Mitras LB splitter

regards Pit

Hello ,
thanks for your help
ok for Mitras Lightbar Daylight ;-)
For the size I fear that the "130" is too big
Or can we find the overall dimensions for each model ?
The space available at the top of the aquarium (inside) is maximum
1270mmx560mm and 85mm Between the water and the lid of the tank
For the number, could one really be enough?

1 Mitras-LB-PSU200, 1 Mitras LB splitter ok I see
but for the Mitras LB ActiveSplitter Cable, it is the rj45 Cable from profilux 4 to splitter ?

Thanks
Best regards, Stephane

Hello Stephane

Quote:

---

1270mmx560mm and 85mm Between the water and the lid of the tank

---

Then you need a lightbar 120, the rest is same

Quote:

---

For the number, could one really be enough?

---

yes

Quote:

---

but for the Mitras LB ActiveSplitter Cable, it is the rj45 Cable from profilux 4 to splitter ?

---

yes

regard Pit

In order to connect one or more Mitras LB, you will need:

1x Mitras LB-PSU200
1x Mitras LB-Splitter
1x Mitras LB-Cable-RJ45

One end of the RJ45 cable connects to the splitter and the other connects directly to the Mitras-LB RJ45 port at the back of the P4. This will allow for up to 4 Mitras LB to be connected to the splitter.

Hello thanks
Sorry I am a little lost
LB-Cable-RJ45 and LB ActiveSplitter Cable are the same item (PL-1065) or not ?

Yes, same item. We changed the name because this cable no longer applies to only the Active Splitter. It is now also used for connecting to EXB2, ProfiLux Mini/Light/Terra and ProfiLux 4.

ok thank you for your help

Best regards, Stephane