Printable View
Hi
A friend of me just buy a profilux 3.1Nex version 5.16
Ive try to update it with the ghl Control center but an error message appear to said that the control center is too evoluate. And I need a former version. I couldn't find it. Where and what version should I take?
Thx
Hi,
Since this P3 is running on very old firmware, you would need to do the update with our original software, ProfiLux Control.
You will also need to have the newest version of GHL Control Center installed on your PC. This will grant you access to the newest firmware file, v6.36
Download this version of ProfiLux Control and connect to your P3:
https://www.aquariumcomputer.com/dow...trol-v5-1-7-2/
1. Begin the firmware update steps using ProfiLux Control
2. When asked to locate the firmware file to use, navigate to the GHL Control Center folder. You will find the firmware file here:
Windows (C: ) --> Program Files (x86) --> GHLControlCenterVxxx --> Firmware --> ProfiLux 3 --> ProfiLux3_V636.mhx
After the update is complete, restart the ProfiLux 3 and connect to it using GHL CONTROL CENTER.
NOTE: Due to the large jump in firmware, previously stored settings will not be saved.