Printable View
I have skimmer on switch 5 as a filter but I have to choose 1 to 4 Then in feed pause I checked all four boxes but it only turns off when I use feed pause 4 .After testing a found that if I change filter number it turns off when I start same feed pause. using P3 ex and gcc1131
Set the Power Socket 5 of the Skimmer to Programmable Logik 1
The Programable Logiks are set to:
G1 = G2 ore G3
G2 = feedpause 1 or 2
G3 = feedpause 3 or 4
As mentioned above, you will need to use Programmable Logic if you want to have the skimmer react to all 4 Feed Pauses. Go to the PL settings page, choose an unused gate, set the function to AND, then select your 1st and 2nd FP. Repeat these same steps, except this time choose your 3rd and 4th FP.
Once that is done, choose a new PL gate and select the PL function which combines FP1 - FP4.
Assign this newly made PL function to the socket that is powering your skimmer.
moin vinny, sicher mit dem und? ich währe für ein oder.
Thank you all I have it working ( i think) I went to pro logic and tried several times. Then read some more and found that in the pull down list filter means feed pause. and G1 is pro-logic 1 etc ...