Printable View
can be downloaded
http://www.aquariumcomputer.com/Download/ProfiLuxControl_V5009.exe
new:
- saving of settings in a file is possible
- further improvements in communication (faster + more stable)
additionally the quality of the connection to the device can be checked with the "communication monitor"
(activate it in menu communication)
Attachment 337
Yes saving works.Quote:
Originally Posted by Matthias
A littel hint in faster start up is to put in the ip of the profilux then it dont scan for the Profilux. Under General - Communication - Connection.
/Bigman
makes sense if ProfiLux has static IP - if automatic IP is used it is possible that this automatically assigned IP changes from time to timeQuote:
Originally Posted by Bigman
Matthias,Quote:
Originally Posted by Matthias
How do i know if i have static IP for Profilux?.. Under communication i have 168.192.1.106
mike
this seems to be static
does it needs a specific minimal FW I have 5.00l on the P3 but
I get an error while downloading the settings to file
Error during reception of "COD_TIMER1_END7 - 0 - 11"
(parameter number 723)
ps: just tried again , crashed again but @ other setting, comm monitor gave continues green line and there there were 3 black ( 3 failed comms and it stopped )
I'm using the TCP/ip option
black line means bad transmission, after 3 failed transmissions ProfiLux disconnects automatically
-> not the firmware is the problem, it seems the LAN-connection is not stable
do you have some details for me? LAN?WLAN? IP? static auto? average response time...
Hmmm, I would be surprised if it would be my network being instable.
I have 3 comps, 1 networkprinter, Wii, PS3 , 2 Nas,P3 on the network (some wired other wifi) and they don't have any issue with the network.
average response was around 30-35 ms.
P3 is connected via CAT5 to my router and the host computer was my laptop (via wifi G ) in this case
ip is fixed DHCP for the P3
I will try to get some info with wireshark or something.
hello,
Did some sniffing on my network see
http://www.aquariumcomputer.com/Foru...ead.php?t=1691