I have installed a new mp10 qd and upgraded the drivers on the remaing 3 to mp10 qd. the vortex controller sees them as mp40wwd. my touch only shows pumps 1 and 3 and the speed or % is wrong. is there a fix. Andre
Printable View
I have installed a new mp10 qd and upgraded the drivers on the remaing 3 to mp10 qd. the vortex controller sees them as mp40wwd. my touch only shows pumps 1 and 3 and the speed or % is wrong. is there a fix. Andre
any one some help please
Are you able to control the second pump from GCC without issues? Is this pump programmed the same way as the 1st and 3rd pump?
What FW version are you running on the ProfiLux Touch?
I have now updated the touch and still only shows pump 1 at 80 and pump3 at 40 and I added one more pump to tank so now have 5 running and they are doing the Tidall swell mode as per ecotech and are controlled by the vortech controller. to solve the problem till there is a fix I do not display pumps on the touch
I think that once the vortech controller is fixed then the profilux will see the pumps and they will show on the Touch