Stream pump control

Hi,

I have two stream pumps in my tank, switch channel 1 & 2.

I would like to program them to alternate whilst on, Stream pump group 1 (got them alternating etc)

I’d like to have them come on and off at certain times during the day..... (timer 3)

I therefore have 3 “zones” that need programming.
1) Switch channel (1&2)
2) Stream Pump Group 1
3) Timer 3

I cannot find out how to programme this, please help.......!

Chris

Chris,

Are these pumps being controlled via the physical sockets on the powerbar or 1-10v?

Quote:

---

Originally Posted by Vinny

Chris,

Are these pumps being controlled via the physical sockets on the powerbar or 1-10v?

---

Hi Vinny,

Just using switch sockets not 1-10v.

Regards

Chris

If you want both pumps to react to the same TIMER, give this a try:

1. Create your timer function

You will now create a Programmable Logic function which combines the TIMER function and the settings for the first stream pump...
1. Go to the Programmable Logic settings page and select an unused gate
2. Set the function to AND
3. Set Input 1 to Stream pump (select first pump)
4. Set Input 1 to Timer (select timer number)
5. Save settings

You will now create a Programmable Logic function which combines the TIMER function and the settings for the second pump...
1. Go to the Programmable Logic settings page and select an unused gate
2. Set the function to AND
3. Set Input 1 to Stream pump (select second pump)
4. Set Input 1 to Timer (select same timer number)
5. Save settings

You will now assign these PL functions to their respective outlets...
1. Go to the Switch channels settings page and select the outlet powering your first pump
2. Assign it to the function, Programmable Logic (choose the gate belonging to the 1st pump)
3. Type-in description
4. Select the outlet powering your second pump
5. Assign it to the function, Programmable Logic (choose the gate belonging to the 2nd pump)
6. Save settings

hey Vinny, this has worked.... thanks a million! First class help!!