Profilux Touch - Night mode

Hi

Before I updated to the touch and the profilux to the latest firmware I was able to dim the touch overnight, has this now been removed with the new firmware?

Thanks

Robert

no, it works still as it should, just tested

please check the corresponding settings in your Touch

Hi Matthias,

Where can it be set .... because I just tried on yesterday but couldn't find.

Mmm .. just looked again under the Touch settings & display settings in GCC V1055 and couldn't see it.

Using firmware V6.10 for profilux and V1.05 for the touch.

Please activate the expert mode under "View" in the top menubar.

Attachment 6325

Gotcha ..

Thanks Atur, appreciate your help.

I also have problem with my touch.
I setup Bright to 50% and Dark to 0% and Dark from 20H to 07H.

Sometime in the Dark time, if i touch the screen, it don't light on :-(

I successfully use these settings on Profilux display and Mitras LX display and hope on touch.

Thank

We will check this.

Any news?
Thank

Hello,

we could not reproduce your problem.
Is there any pattern when the touch don't light on?

Hello,

{Profilux Display}:
Settings: Bright:5% Dark:0% From:20:00:00 To:07:00:00
Result:
->Display is 5% from 07h to 20h and 0% from 20h to 07h
->When i press a button between 07h-20h it go from 5% to 100% and return to 5% few seconds after not touching button
->When i press a button between 20h-07h it go from 0% to 100% and return to 0% few seconds after not touching button
->All its OK

{Profilux Touch}:
Settings: Bright:9% Dark:0% From:20:00:00 To:07:00:00
Result:
->SOMETIMES Display is 9% from 07h to 20h BUT many time Display is 100% from 07h to 20h need to revalidate/change time or the touch not go to 9% Also screen picture background is not updated from "ProfiLux Touch blue background" and no sensors display, need to touch the screen) and 0% from 20h to 07h Sometime need to revalidate/change time or the touch not go to Dark…
->When i touch it between 07h-20h it NOT go from 9% to 100%
->When i touch it between 20h-07h it NOT go from 0% to 100% it go from 0% to 9% (and sometime it left at 0%) and return to 0% few seconds after not touching it

Thank

Thank you for your help, we will check this as fast as possible.

Also Alarm is setting to off on touch.
If i push alarm icon to enable it, touch reboot and go to 100% bright.

Also when alarm screen picture background is not fully updated from "ProfiLux Touch blue background":
Attachment 7189

Hi,

Any news?

Thank :-)

Hello,

yes we could reproduce your problem and it will be fixed in one of the next firmware updates.

Hello,

When can we hope a fix? :-)

Thank

Quote:

---

Originally Posted by Artur

it will be fixed in one of the next firmware updates.

---

Any news?

Thank

It is on the ToDo-list and we will announce it.