Printable View
my TMC led flash with thunderstorm, i use GHL LED Control-1 (PL-0603) and i got a simu stick for the thunderstorm and for some reason my tmc flash also.
i only want to flash the simu stick, is there anyway to remove the flash for the tmc.
regards cees
We will check this and get back to you.
Quote:
Originally Posted by Carolin
thank you
btw i got a L expansion card with also a tmc led on that one and that does not flash.
regards Cees
Flashs are only possible at internal L-ports but not via PLM-4L or PLM-2L4S
In this case, you better connect the LED-Control1 with the TMC to the PLM-4L/PLM-2L4S.
I have more lamps than l cards.
The normal l port should work ok
Is it possible that when you learn the l port for the flash that the ghl tmc modul is also learned to flash.
And is there a way to learn it out
Verstuurd vanaf mijn GT-I9100 met Tapatalk 4
anyone?
Can you describe this with other words, please? I don't understand your question...Quote:
Originally Posted by greenbee
It was a reply on the message of frank
I have more lamps then l ports in extension cards so i need to plug them in on board l ports also
Verstuurd vanaf mijn GT-I9100 met Tapatalk 4
and for the learn in thing, when you set the flash for simustick, the setting is stored in the simustick.
is it possible that the same setting is stored in the led control for the tmc? (in the manual it sayes that you need to unplug all L port exept the simustick, i am not sure i did that)
and is there a way to reset it?
Sorry, it is not possible to program the LED-Control for flashes/thunderstorms.
Ok so what is the problem ghan that it reacts to the flashes
Verstuurd vanaf mijn GT-I9100 met Tapatalk 4
any news jet?
this is what i like about this forum so mutch, the feedback you get
I mentioned it before:Quote:
Originally Posted by greenbee
"Sorry, it is not possible to program the LED-Control for flashes/thunderstorms."
The LED-Control 1 is not designed to react to flashes and thus can't simulate thunderstorms.
It is not planned that this is changed in the future. This is all I can say regarding this question,
so I will close this thread for now.