AI control of all 3 channels white, blue, Royal Blue?

AI has now released the new firmware for their controller to have separate control of all 3 channels...white, blue , royal blue

when will the profilux be capable of handling the 3 discrete channels?

+1

I was just going to ask the same question on RC but thought I would check here first.

we got feedback from Aqua Illumination - they don't want to give us the technical details before January (no date available so far)

-> we can't do anything in regards to our firmware at the moment

Has anyone the new 3 channel AI lamp yet?

if yes - please send me a PM

pm sent

Hi Mathieus, I have new AI light, can you assist with control of all 3 channels?

Please sent a PM to Matthias - thanks.

Done, I have discovered a problem, when I set the Illumination 1 & 2, to 100%, on the Display is only shows 30% & 28%? Is this a bug? Can the light be properly controlled?

I don't understand this post

Hello Matthaius what I'm trying to say if I configure Illumination 1&2 in pcl 5 to 100% & save the configuration to the p3, on the display of the p3 it only shows Ilimination 1&2 at 30% & 28%, I don't see it ever going to 100%. illumination 1 is configured for white led & Illumination 2 is configured for blue led.

the display shows the actual brightness which is defined by the illumination settings you have made

This is what I am trying to say, the actual Illumination config is set for 100% both white & blue, but the display isn't show 100%, it only shows 30% & 28%. I have a theory could it be that when you config Thunderstorm, rainy days, cloud simulation that these actual figures never get to 100%?

it could be all of them or the moon simulation

-> just switch off all simulations and watch what happens

Hi Matthias, just tried that, the max the p3 was displaying was 74% for white, & 72% for blue, I had them set for 100% with pcl program, & disabled clouds, thunderstorm, rain, & moon phase.

please post screenshots of the relevant illumination settings

Hi Matthias, I will send screenshots in an email to you.

Did this ever get resolved, I would like to get the AI LEDs but don't know if the Profilux can handle it...

Yes, it did, I think as of 5.06 it was added, & you now have control of all three colours, I'm running 5.09 firmware on my P3, & all is good.

Cool thanks, appreciate you coming back and letting us know

What connection does the AI GHL cable use?? I cant find any information

Thanks

It's the serial cable, available either thru profilux or AI http://ghl-direct.com/proddetail.php?prod=profiluxAI

Hi GHL Team

Is there any time soon a fix for the new AI lights,
(control of all 3 channels white, blue, Royal Blue)?

ProfiLux supports AI 3 channel lamps already!