How to design the EcoTech module

Hi
it seems there is quite some interest in this module ...
Now a question to all
These are the possible options:
- internal expansion card
- external module for RS232
- external module for PAB
decision hasn't been made yet, there are advantages/disadvantages for all of these ideas.
In regards to ProfiLux II - it is not clear yet if is possible to make this module also working with PII, simple reason: PII internal ressources are maybe too "full" for the EcoTech control.
If it is not possible to have the EcoTech support in the PII I personally would prefer a module for the PAB.
OK, discussion started.

I have a PII at the moment, if it can come to the PII would prefer internal card

If the PII is not up to the job the i will upgrade to the PIII and you might as well then use PAB if PIII only

i cant wait for this module!!!!!

whats the ETA? :D

Approx. from July 2010 on GHL will offer this controller which enables ProfiLux to control the EcoSmart Driver of the VorTech propeller pumps!

lets hope theres not delay! :eek:

Quote:

---

Originally Posted by MikeBuzz

I have a PII at the moment, if it can come to the PII would prefer internal card

If the PII is not up to the job the i will upgrade to the PIII and you might as well then use PAB if PIII only

---

I agree here 100%. I'd rather have it backwards compatible if possible but not EVERYTHING in life is always "possible". I'll probably upgrade to PIII (and EX) eventually anyway. For right now I vote either:

• - internal expansion card
• - external module for RS232

but if not really practical for PII+ then I vote

• - external module for PAB

Allen (indecisive)

I would say a PAB module would be the best, you will be able to have the wireless Profilux interface close to the Vortech controller without having to have the Profilux controller next to it.

Quote:

---

Originally Posted by boboxx

I would say a PAB module would be the best, you will be able to have the wireless Profilux interface close to the Vortech controller without having to have the Profilux controller next to it.

---

Yeah that makes a LOT of sense! Dang I know I need to upgrade to a PIIIex now!!


Can I change my vote? LOL!

same opinion as others in the thread

if being compatible with the P2(ex) would limit the overall capabilities of the ecotech module. Then I would drop p2 support. But hey I have a P3 :)

Once your into the P3 device, PAB would be the choice , it is flexible and your not limited by expansion slots, location, etc...

I would be intrested to see the difference between control of tunze and ecotech. Since I run both tunzes and vortechs.

PAB all the way!

I would suggest PAB first then create a PAB expansion card for the PII that will work with single devices (Or power bars)

My thoughts are inline with everyone else so far. Backwards compatibility is always nice and will make for greater product sales etc. But there is nothing worse than a product feeling like it could have been better and so if its not possible to bring it to its full potencial on the PII then I'd plump for PAB product.

As said the wireless range of the vortechs is more than a little overstated in the specs and so whichever option having a remote aerial/unit will be neccessary to get it within optimum range of the pumps.

Can you make an external box with both PAB and and RS232 port? That way you could select which interface works better for you.

I have a P3 so, I am all about the PAB and am very excited about this product.

Personally, I think PAB will be the interface of choice for several reasons:

1.) If the PII cant use it anyway, no need to force users to use one of our limited expansions slots or RS232 port

2.) PAB allows users to wire modules farther away from the profilux, which in the case of wireless control of the Vortechs is very important. Limited wireless range might severely impact the performance of the module if we cant get it close enough to the vortech controllers.

3.) Many, many users already complain about having to use their RS232 interface for AI control as it limits the ability to use a View II or Serial connection to a PC while controlling lights. If we have yet another device that uses RS232 it may force people into buying more expansion modules that take up valuable space that could be better served for more L ports, or an extra Ph module etc.

So in short.. PAB all the way. Its a wonderful interface, and would be nice to have more devices that work with it.

I have read all the opinions so far. All good points for sure. My vote would be for a internal card. If my thoughts are incorrect, Mathais please enlighten me.
To allow everyone the Vortech control option the internal card would be best, IMO. Using the RS would not work for AI users and View II users. The PAB module nearer the Vortechs is a valid point for those with distance issues. But usually our sumps are just below the tank or in an adjacent room so that distance is within the Vortech operating parameters. If running the Profilux at a distance from the main display tank then you are probably already using an expansion box so the card could be used there too. I am sure there are instances that would not fall under these conditions, just my two cents!
Maybe a PAB module capable of holding one or two cards. This way anyone with multiple tanks or wanting to have say another temp probe at the tank, and Vortech control, could do so without buying the full expansion box. And the Vortech card could still be used by PII and PIII users. I guess I am voting for one and three. LOL neil

One word, PAB.

It's clearly the way forward in terms of expansion, no doubt the reason you guys invented it. So why not exploit it, would seem like a waste of tech not too.

PAB sounds good to me but I really don’t care as long as get the functionality. You could send me a module and a roll of duct tape and I would be happy.

Quote:

---

Originally Posted by mcrist

PAB sounds good to me but I really don’t care as long as get the functionality. You could send me a module and a roll of duct tape and I would be happy.

---

LOL!


Great attitude to have!! :)

forgive me if im wrong but cant PII users upgrade to a PIII?

In that case then PAB is the only way, you arnt stopping PII users from getting this new tech as there is already a solution to upgrade to a PIII which features PAB.

In all cases we need to move forward, backwards compatibility is fine if the older version is unable to be upgraded, in this case you can so why continue to support old tech.

I have a PII and don't need the expansion capabilities of PAB or the PIII. I'd like the Vortech module and there are probably others like me who may miss out if it means upgrading to a PIII just for this module. An internal card would work for everyone.

internal port for me, i only have a 500ltr display and sump directly below so in my eyes why would i need a PAB, my pIII i in the cabinet also!

could the same card not fit in the pIII and also the PAB unit?

jamessrick,

Just for clarity, PAB isn't just the expansion box. PAB is the link used to connect the new powerbar, expension box etc together.

I think whats being refered too here is an external unit which connects via the PAB cable, not a card which sits inside the expansion box or main unit.

Hence why so many people have voted external PAB.

Hope that helps,
Dave

Thanks for all the votes!

We will design it for the PAB!

Thread and voting closed now.