Printable View
New to GHL and can't get my mind around this programming yet and I am sure what I want is so simple.
I have my UV pump on Switch Channel 2 and the UV lamp on Switch Channel 3 and if the pump should ever go off I would like the UV lamp to switch off.
I currently have set both Switch Channels to Always On.
Anyone help me to sort this, please.
Many thanks
How would the ProfiLux know your UV pump went OFF?
Under what circumstances would this pump turn OFF? Feed pause, maintenance mode?
The reason I want to do this is to avoid the lamp being on without water flowing through the UV unit.
I am not sure how the Profilux would know how my UV pump is off that is why I am asking the question. It is not related to feeding pause or maintenance but just if the pump failed or the power to it went off.
I have this set up at the moment on the controller that is being replaced and it also switches the lamp off if the aquarium temperature gets above 27.2.
Hope that clarifies what I am needing. I could post the other controller code if that helps to explain it.
Many thanks
Yes, if you can post it that will clarify exactly how the task should be handled.
Here you go then
UV Pump
Attachment 12381
UV Lamp
Attachment 12382
Many thanks
Vinny Any update on this, please
The fallback can be done when you go to the PAB devices page and choose the powerbar where the pump and UV is connected. There you can choose how the desired outlet(s) will react in case of a disconnect from the head unit.
You can set both the pump and UV to react to a temperature reading by assigning the Temperature Heater function to those outlets. If you want the OFF-point to be different from your current temperature probe settings, you can do this by creating a virtual probe.
Creating virtual probe
1. Press up or down arrow keys on P4
2. Select System
3. Select Virtual probes
4. Select New virt. probe, choose copy and select the temperature probe, then save
That will create a second temperature probe (virtual) which you can use for the pump and UV.
Within the temperature probe settings page you can also change the control behavior of this function. More information on this option is on page 60 of the P4 Programming Manual.
Thanks, Vinny I will give the temperature one a go.
I am aware of the fallback setting as you have explained before and I already have the fallback set to ON for the UV pump. I have left the UV lamp Fallback as OFF because I would not want that ON if the pump wasn't running which is my initial request for programming.
Obviously you know far better than I do but I am not sure what you are suggesting achieves what I am after. If the pump disconnects from the head unit it doesn't necessarily mean that it has stopped working does it. ?
Can it not be resolved by referring to the A reading?
A reaction to Amperage reading is a feature that will be released soon. ;)
Awesome.Quote:
Originally Posted by Vinny
Sent from my iPhone using Tapatalk
you could use a flow sensor and create an alarm in case of a pump failor. woth the programmable logik you can stop the uv lamp in case of an alarm.
I have tried to set up the temperature control suggestion which I think I had right but I immediately got an alarm - I was setting the lamp to go off if the aquarium reaches 27.2 C and it was reading about 25 C at the time so I deleted the virtual probe fro the time being. Not sure why it was alarming out?Quote:
Originally Posted by mlandscape
I am sure you gave me the right page location because in the ProfiLux 4 Programming Guide page 60 is about Operation Mode Controller.
That sounds promising will have to see if in due course it is appropriate.Quote:
Originally Posted by Vinny
Now that is something I had not thought of but I was trying to avoid more expense and resolve it with programming but disappointed that there does not seem to be a readily available solution for what I would expect to be a fairly basic request.Quote:
Originally Posted by Gandalf
As far as the flow sensor is concerned it only has about 600 litres going through it and the smallest is 2000 - don't know if that is a problem? Also pipework through the UV is on a flexible hose and I don't know if you can use the flow sensors on the hose?
@Vinny your further feedback would be appreciated ThanksQuote:
Originally Posted by mlandscape
@Vinny any thoughts on this suggestion, pleaseQuote:
Originally Posted by mlandscape
When you get the opportunity @Vinny I would appreciate your repsonse on the last two posts - many thanks
Oops...seems I missed this one!
The flow ranges are on our GHL shop pages.
In the case of the FS 2000, the flow range is 100 - 2000 l/h
https://store.aquariumcomputer.com/e...r&inc_subcat=1
Hard pipe or tubing with a FS does not matter. Either would be fine to use.
Thank you, Vinny, I had missed the flow range where I had looked and only seen the maximum flow.
Did you see my comment above that I had tried the temperature control of the lamp as you had suggested but got an alarm?
"I have tried to set up the temperature control suggestion which I think I had right but I immediately got an alarm - I was setting the lamp to go off if the aquarium reaches 27.2 C and it was reading about 25 C at the time so I deleted the virtual probe for the time being. Not sure why it was alarming out?
I am not sure you gave me the right page location because in the ProfiLux 4 Programming Guide page 60 is about Operation Mode Controller."
Check your probe settings; nominal value, hysteresis and alarm thresholds.
The page provided gives an explanation of other ways the ProfiLux can manage temperature control.