Doser gen 1 connect to profilux 3.1 n EX

Hi all.

newbie here :-)

I got a second hand profilux 3 with the doser
I ve been trying to connect it to the console but I fail miserably. Could I get some help please?
What I ve done is:
1: reset P3 to factory setting
2: got the latest GHL centre and updated my P3 to latest firmware.
3: I connected the doser to S4 port
4: I enable the S1-S4 socket
5: I go to program digi pb or pu and I choose numbering of a dosing pump
6: I go to channel one, edit and assign dosing pum 1
7: I do this for all 4 pumps
8: Save changes
9: I then go to dose overview but non seem top responsed. I press the manual and they do not work.

Any help?
cheers

and an attachment of my control centre.
thank you in advance

you only have to assign the first dosing pump.
dose dosing pump 4 works? evtl. changed with dosing pump one?

Quote:

---

Originally Posted by Gandalf

you only have to assign the first dosing pump.
dose dosing pump 4 works? evtl. changed with dosing pump one?

---

Thank you very much for your reply
Sorry not sure what u mean.
Its my first profilux ever. ��

first, disable "Digital powerbar connected on S1-S4, and save the setting
regard Pir

Quote:

---

Originally Posted by PIWAWT

first, disable "Digital powerbar connected on S1-S4, and save the setting
regard Pir

---

many thanks for your reply.
still nothing though. :-(Attachment 12376

Please send a picture of the setting of a dosing pump

regards Pit

@piwawt:
Bist du sicher, dass der Doser Gen. 1 ohne eine digitale Kommunikation auskommt?
Ich lese Kapitel 8.10 in der Anleitung vom P3 anders.
Eine Anleitung für den Slave Doser habe ich leider nicht mehr gefunden.
Für die Analoge Kommunikation würde es auch keinen Sinn ergeben, dass man die Schaltkanäle für die Pumpenköpfe programmieren kann.

@antegeia7:
Please check your doser is connectet to a red port at the profilux and you use the right port Nr. 1-4.
Do you have connectet anything else to the red ports of the Profilux?

Quote:

---

Originally Posted by Gandalf

@antegeia7:
Please check your doser is connectet to a red port at the profilux and you use the right port Nr. 1-4.
Do you have connectet anything else to the red ports of the Profilux?

---

Thank you for your reply.
Yes it's on t6he S1-4 red port and nothing else is connected on the profilux at all
I do not have a schedule set as the doser wont work when I click on the manual dose putton on my GHL centre.

PS: I do nit have the original rj12 cable but a generic.
However it has 6 cables as recommended. Dos it matter its not the originaL/
thanlk you again

a normal rj12 should work. if you have a multimeter you can check all 6 pins of the cable. does your doser have a display on the top?
and i still think you need to use the option with the digital power bar connektion.
try to set the switch channels as always on. so you can see, there is a problem with the connectiion doser an p3 or with the configuration of the dosing pumps.

Quote:

---

Originally Posted by Gandalf

a normal rj12 should work. if you have a multimeter you can check all 6 pins of the cable. does your doser have a display on the top?
and i still think you need to use the option with the digital power bar connektion.
try to set the switch channels as always on. so you can see, there is a problem with the connectiion doser an p3 or with the configuration of the dosing pumps.

---

No it doesnt have a display on the top, its the slave unit.
I purchased the console and the doser only no power bar though.

But I found a second hand old style 6d the non pab on ebay which I will order.

I will try to switch them to always on and I will advise.
Many thanks again I appreciate :-)

I think profilux doesn't talk to the doser. ����