The new Webinterface for ProfiLux4 und Mitras LX7 is now available

Printable View

16.02.2018, 14:56
MatthiasF

2 Attachment(s)

The new Webinterface for ProfiLux4 und Mitras LX7 is now available

The new Webinterface for ProfiLux4 und Mitras LX7 is now available:

Attachment 10288

Attachment 10289

This is a major release and it is necessary to follow exactly the instructions and manuals as follows:

The new minimum requirements for Mitras LX7 and ProfiLux4
Die neuen Voraussetzungen fuer Mitras LX7 und ProfiLux4:
1. ProfiLux 4 Firmware version: 7.11
2. Mitras LX7 Firmware version: 1.07
3. WiFi-Module version: firmware.bin, Version: 6619
4. Webinterface-file '.\WebContent\index.html.gz', as of 02/16/2018

These points match also the step-by-step-procedure, in order to do the whole update successfully.

The manuals and current WiFi-module files for the update are downloadable from our Download-Center:
https://www.aquariumcomputer.com/dow...l-esp-update/#

Known problems and solutions:

* If a WiFi-update over the Webinterface is unsuccessful also after several retries, you can use the WiFi-Update-Tool and update
the WiFi-module over the ProfiLux4 or Mitras LX7-USB-connection, in order to get the latest firmware 6619 up and running.

* The update of the Webinterface is done by choosing 'Settings->File transfers' in the old interface with the file index.html.gz

* An update of the filesystem at delivery with the file spiffs.bin deletes the current WiFi- and mailconfiguration and is only necessary, if the
webupdate fails.

* After uploading the new Webinterface, the browsercache must be emptied by reloading with the keycombination Ctrl+F5.
16.02.2018, 16:01
Gael

1 Attachment(s)

Thank MatthiasF great job :-)

But i can't find where we can see Measurement graph like this:
Attachment 10299

Same problem with Android app, i did not found it.

This feature must absolutely come back, tracking parameters is essential for an aquarium computer.

Gael
16.02.2018, 17:41
Vinny

Gael,

This will be a future release.
16.02.2018, 17:42
Gael

Ok, no problem.

But hope in the coming weeks, not in 6 months.

Thank :-)
22.02.2018, 02:24
KevinR

I have the Web Interface Installed thoroughly impressed a great first step !!!

A Few thing I noticed missing, but figured I would post so known:

1- Can we get the Vortech Menu Added?
2- Can we get Amps Added to the Outlets and I would say for both the GCC App and this?
3- Are we going to be able to do the System type functions within the P4 Interface? (Example add a device, upgrade a device)
4- Can we get advanced program logic in the P4 and the GCC App also?
5- Notification Options?
22.02.2018, 08:29
MatthiasF

Quote:

Originally Posted by KevinR

I have the Web Interface Installed thoroughly impressed a great first step !!!

We are glad you like it as we do.

1- Can we get the Vortech Menu Added?
2- Can we get Amps Added to the Outlets and I would say for both the GCC App and this?
4- Can we get advanced program logic in the P4 and the GCC App also?

These functionalities will come step-by-step.

3- Are we going to be able to do the System type functions within the P4 Interface? (Example add a device, upgrade a device)

Those 'system functions' rely on physical connections (USB for firmware upgrades, PAB-devices). Although it would be possible,
this is not a daily task and hard to realize. But never say never ;

5- Notification Options?

We plan this for one of the next release cycles and it will show states and alarms.
22.02.2018, 08:33
MatthiasF

We are glad you like it as we do.

Quote:

Originally Posted by KevinR

1- Can we get the Vortech Menu Added?
2- Can we get Amps Added to the Outlets and I would say for both the GCC App and this?
4- Can we get advanced program logic in the P4 and the GCC App also?

These functionalities will come step-by-step.

Quote:

Originally Posted by KevinR

3- Are we going to be able to do the System type functions within the P4 Interface? (Example add a device, upgrade a device)

There are no plans yet. Those 'system functions' rely on physical connections (USB for firmware upgrades, PAB-devices). Although it would be possible,
this is not a daily task for any user and takes longer to realize.

Quote:

Originally Posted by KevinR

5- Notification Options?

We plan this for one of the next release cycles and it will show states and alarms.
25.02.2018, 14:16
KevinR

#5 thank you so much for that feature, will it also include dosing pumps States also then?
12.04.2018, 10:34
networkcrasher

My mitras has a blank web page after doing the firmware update, so I can't upgrade the web pages. How do I upgrade them so they work? Right now the web interface is just a blank page.
12.04.2018, 11:28
MatthiasF

Quote:

Originally Posted by networkcrasher

My mitras has a blank web page after doing the firmware update, so I can't upgrade the web pages. How do I upgrade them so they work? Right now the web interface is just a blank page.

You will have to upload the filesystem.
Navigate to: http://[MitrasLX7-IPAddress]/update
and browse for the file 'spiffs.bin'

After reconfiguring the WiFi-settings via GHL Control Center, the webinterface should be back again.
12.04.2018, 14:46
networkcrasher

Yep, that's what got me fixed. I did the spiffs.bin ones, immediately after the firmware update, but all it did was reset my network config and broke web pages. I loaded it again via the emergency page and they came back up ok after I reloaded the network config again. Not sure why it took 2 times, but thanks!