I have also noticed that I have to transmit/save/update twice before the selected lighting program is loaded.
Gazz
Printable View
I have also noticed that I have to transmit/save/update twice before the selected lighting program is loaded.
Gazz
I didn't have that problem. But still trying to figure out all the VERY CONFUSING programming options.
I LOVE the lights, hardware is great but software AND instructions are very hard to decipher. Feel like I need a degree in physics to understand.
Once you have set you lights composer settings you then press transmit to Mitras. This will then send all the data to the different channels and you will see the channels open up. These can be then closed down.
The other save setting is to save your project to your PC. This is the file which you can then work on at a later date or send to a friend.
it says on page 10/21, to press "transmit illumination run to illumination channels" first, then hit "save changes, to save to yr pc, you hit save under the project tab.
Also on same page, the "test illumination run", this only works on the illumination program loaded into the lamp that is running, it would be cool if it would test the illumination program you are writing
Gazz
Yep this is correct. It will test the run once you have transmitted it, think of it this way the lamp does not know what settings you have changed until you have transmitted it to the lamp, so once you have done this, go back into the composer and then the illumination run can be tested.
Hi All
Which Mitras spectrum (channel) is closest to actinic lighting?
Thanks to all in advance
anything above 22k
Thanks very much Michael.
What per cent of the total spectrum would you suggest the 425HV by set at?
This really is your own personal preference, no two people will see it the same way.