Printable View
Mine seems to work,
I got a trigger on level 3 and the sms had a level 3 alert,
When it cleared it showed .Level:
So maybe you should redo the firmware. i am using sms firmware 3.03.
Matthias,
The SMS shows what level is alarmed which is great, so when will a sms update be available so that it will also show when sensor is alarmed, as all it says for other sensors is Alarm?, as it can do it for level sensors then it should be able to do it for others.
Still waiting for answers from GHL. I did redo install of new FW but prob still persists.
Doggydoc
I have the same problem with the e-mail alarm, With the new firmware you get a alarm e-mail when a "levelcircuit goes bad" but there is no indication which levelcontrolcircuit triggers the alarm, not really handy...... In the old firmware there was a indicator behind the level control circuit which triggered the alarm. (See screen shots from e-mail with old and new firmware).
"Level 1 - off, Level - 3 off"..?????.....this does not give me the information on which levelcircuit is the trigger for the alarm
I know that Level 1(and 2) Are the levelcontrolcircuit in my filtercompartment, and level 3 is the one which does make sure that my aqaurium tank does not overflow. Would be nice to know which of the two levelcontrolcircuits is the trigger for the alarm.
Please make the alarm messages back to the way the where.
LEVEL ALARM E-MAIL NEW FIRMWARE
Attachment 4193
LEVEL ALARM E-MAIL OLD FIRMWARE
Attachment 4194
Profilux knows which levelcontrolcircuit is the trigger for the alarm, so put it in the Alarm E-mail, like in the old days;)
Attachment 4195
I also have the issue with level alarm in email. all it says is alarm level, does not say which level is alarmed,Quote:
I have the same problem with the e-mail alarm,
Also today i got a sms alarm, but it never told me which level is triggered,
Seems there are issues.
I checked my system and it seems it works as it should, we must find now the differences.
The first thing is that you should be able to show the level sensor states on the ProfiLux screen. It is really weird that you don't see them.
Please do these display-settings:
Attachment 4197
with these settings I can see on my display this:
1.
Attachment 4198
all sensors (1-6) contact to water
2.
Attachment 4199
senors 1 + 2 no contact to water
please let us first have this state in your system before we continue
as long as you can't see this it is not sure that the settings, hardware setup or the firmware version are as expected
Ok here are my screens.
Currently I CANNOT SEE NUMBERS ON MY SCREEN like you have posted.
http://img.tapatalk.com/d/13/04/06/yju2yqy2.jpg
http://img.tapatalk.com/d/13/04/06/ype5e3u6.jpg
http://img.tapatalk.com/d/13/04/06/2umenuny.jpg
Thanks for the help Mathias.
As far as connection, let me state that I have one level sensor input split into two coming from my P3. And another one from an EXP box also split into two.
So total 4 sensors. But NONE OF THEM ARE SHOWING IN SCREEN
Doggydoc
Just realized something.
If I invert sensors like it shows here:
http://img.tapatalk.com/d/13/04/06/junyta7u.jpg
I DO SEE sensors
In display and I got SMS with the corresponding level showing.
http://img.tapatalk.com/d/13/04/06/7e5u6ybu.jpg
http://img.tapatalk.com/d/13/04/06/mu6aguze.jpg
My issue is that MY SENSORS ARE ALL LEAKAGE SENSORS....if I don't invert them they won't work the way I want to. Can I achieve the function i
I am looking for and at the same time have SMS show levels that are triggered?
Any input?
Doggydoc
Here is the SMS showing sensor 2 as alarm.
http://img.tapatalk.com/d/13/04/06/emyzare5.jpg
Doggydoc
If I use RETURN PUMP. WIll that make a diff?
Doggydoc
On the profilux display it only shows 7. so i assume this is level 7.
On the level sensor display it only shows level sensor 7 with X.
However level sensor 7 is disabled.
so unsure why the other sensors do not show.
https://lh3.googleusercontent.com/-A...s767/level.jpg