Wifi Issue with P4

Hi,

I have the same problem with IP of Auto.

https://youtu.be/vPSiKLujGcI

These are my communication settings:

Attachment 9387

I pinged it:

Attachment 9388

I set up a new P4 connection using ip:

Attachment 9389

And tried to connect:

Attachment 9390

I tried both methods (static and dynamic). But it doesn't work. I cannot connect to GHL control center by Wifi. But...... I can connect to MYGHL. ¿What happens? This is very strange:

Attachment 9391

I can connect to MYGHL and modify everything. But I cannot connect to GHL Control Center using Wifi:

Attachment 9392
Attachment 9393

Quote:

---

Originally Posted by EgaReef

Hi,

I have the same problem with IP of Auto.

https://youtu.be/vPSiKLujGcI

---

please use NOT Auto and enter the static IP

if your P4 is accessible under a certain IP x.x.x.x and you ping this IP successfully GG MUST connect to this IP when you have this IP in the connection settings, there is no way it doesn't work

Decena, why client AND access point?

- use client mode only
- enter the static IP (NO DHCP) and the correct subnet, gateway and DNS

save
disconnect
just to be sure reoboot P4

Quote:

---

Originally Posted by Matthias

please use NOT Auto and enter the static IP

if your P4 is accessible under a certain IP x.x.x.x and you ping this IP successfully GG MUST connect to this IP when you have this IP in the connection settings, there is no way it doesn't work

---

I don't used Auto, I have static IP 192.168.2.200

You can see it in the video.


Enviado desde mi Nexus 5 mediante Tapatalk

Quote:

---

Originally Posted by Matthias

Decena, why client AND access point?

- use client mode only
- enter the static IP (NO DHCP) and the correct subnet, gateway and DNS

save
disconnect
just to be sure reoboot P4

---

Hi Matthias, I have just try with your setting, but I get the same error: "Could not connect. ¿Do you want to check the settings now?". These are my new settings:

Attachment 9394

Attachment 9395

Try to do the following trick that helped me:

0. Connect cia GCC/ USB to the PL4
1. Go to communication and click WPS Setup
2. Wait a few seconds then disconnect
3. Connect again
4. Go to communication and deactivate WiFi and save
5. Disconnect again an wait until the WiFi LED is off
6. Connect again and activate client mode (Settings are not lost)
7. Save, disconnect, wait until green wifi led comes on again, try to connect via wifi

This works for me.

Quote:

---

Originally Posted by Yosh01

Try to do the following trick that helped me:

0. Connect cia GCC/ USB to the PL4
1. Go to communication and click WPS Setup
2. Wait a few seconds then disconnect
3. Connect again
4. Go to communication and deactivate WiFi and save
5. Disconnect again an wait until the WiFi LED is off
6. Connect again and activate client mode (Settings are not lost)
7. Save, disconnect, wait until green wifi led comes on again, try to connect via wifi

This works for me.

---

Thanks a lot Yosh01. Now, it works perfect. Thanks !!!

Hi,

I have already successfully connected via Wifi. I have updated both the Profilux and the Wi-Fi to the latest version.

But I still use the emergency update. :(

Regards