-
Hier meine zwei Wünsche die ich hier der Übersichtlichkeit halber auch mit rein schreibe.
-Ich würde mir eine Möglichkeit der Vorgabe der Skalierung der y-Achse wünschen. Der Leitwert geht von 0 bis 100. Temp. von 0-40 usw. Das brauche ich natürlich nicht und würde es daher gerne anpassen können. Je kleiner die Range, desto genauer kann ich ablesen.
-Ebenfalls wünsche ich mir eine Möglichkeit der Darstellung der Messwerte auf der X-Achse als Uhrzeit (respektive Datum bei größer einem Tag). Der Verlauf sollte vortschreibend von links nach rechts gehen. Ich fände diese Art der Darstellung deutlich übersichtlicher. Außerdem kenne ich sie so vom ProfiluxControl.
Grüße
Axel
-
Das ist wirklich eine gut Idee, dann wird das viel übersichtlicher !!!
Vor allen Dingen mit dem von links nach rechts schreiben.
gruß maik
-
Die Erinnerung sollte man durch anklicken des blinkenden Symbols in der Leiste nach Abfrage ausschalten können. Das hangeln durchs Menü brauchts ja eigentlich nicht. Ist ja alles da. Nur noch eine zusätzliche Abfrage und alles ist paletti.
-
Oh ja Alarmquittierung!!!
Das wäre auch mein Wunsch! Ich kenne das Menü und weis wo ich hin muss, und jetzt kommts: ABER ich bin leider nicht der einzige der mit den PL und den Touch arbeitet. In meinen Fall ist es die Wassernachfüllung. Wenn mein Fass leer ist und kein Wasser nachgefüllt wird bekommt man logisch eine Fehlermeldung, welche zum zurückgesetzt werden muss damit erneuten Wasser nach gefüllen wird. Wir arbeiten aber zu zweit und da kann es schon mal vorkommen das wir beide die rote LED der Fassüberwachung ignorieren :-(. Deshalb vereinfachte Alarmquittierung (Bedienerfreundlicher, in meinen Fall Ehefraufreundlich oder Mama Papa Urlaubsvertretungsfreundlich!) :-)
-
Hallo,
ich würde mir zudem noch wünschen, dass man mit einem Tastendruck, eine vorher definierte Hauptbeleuchtung auf 100% setzen kann. Hintergrund ist, dass ich meine Wasserwechsel an einem Regentag vollziehe und dann zweitweilig auch an den Pflanzen arbeite. Dafür reicht dann manchmal das Licht nicht aus und der Weg über das Menü bis hin zur manuellen Steuerung ist da zu lang. Ein Schalter voll an und aus wäre daher sehr nützlich für die Pflanzaktionen...
Grüße
Marc-A
-
Hallo Marc,
stellt sich für mich die Frage, warum dafür nicht die Funktion "Wartung" genutzt wird?
Auszug aus der BDA:
"6.1 Wartung
Während der Wartung und Pflege des Aquariums ist es vielleicht wünschenswert den Schaltzustand mancher
Schaltsteckdosen oder die Helligkeit von Leuchten explizit einzustellen. Ein Beispiel wäre das Abschalten der
Heizungen, Setzen der Strömung auf Minimum und Einstellen eines dimmbaren Leuchtbalkens auf 80%. Um ein
Maximum an Flexibilität zu erreichen beziehen sich die Einstellungen der Wartungsfunktion direkt auf die Hardware
(Schaltsteckdosen und 1-10 V-Schnittstellen) und nicht auf Steuer- und Regelungsfunktionen (z.B. Temperaturregelung
oder Beleuchtungskanäle).
ProfiLux II verfügt über einWartungsprogramm, ProfiLux 3 bietet 4 getrennt einstellbareWartungsprogramme."
-
Hallo Martin,
mea culpa, mea maxima culpa... diese Möglichkeit hatte ich vollkommen außer Acht gelassen, weil ich nicht bedacht hatte, dass auch die 1-10V Schnittstellen angesprochen werden können. Und in die BDA gucke ich nicht, weil all die neuen Funktionen bei mir eh nicht drinstehen. Meine ist von anno dazumal... :o eine pdf habe ich schon mal eingesehen, aber das macht man ja nicht ständig und es war einfach für mich ausgeschlossen, dass das schon geht, stellte sich also die Frage nach der online BDA gar nicht.
Trotzdem VIELEN DANK für die Antwort. Dann will ich mal die Tage eine erweiterte Variante der bestehenden Wartung programmieren.
Abendliche Grüße
Marc
-
Bei mir funktioniert das mit der Wartung nicht, da man DALI darüber nicht ansprechen kann :-(
-
Hallo,
Ich würde gerne mehrere PL3 (in meinem Fall zwei PL3) von einem Touch kontrollieren und bedienen können die im gleichen PAB Netz angeschlossen sind.
MFG Monty
-
Ich habe momentan das Problem, dass wenn Nachts die Anzeige dunkel ist (0%) und ich dann das Display antippe, immer gleich das Menu angezeigt wird und ich dann wieder auf zurück klicken muss um meine Werte zu sehen.