Just go on search and type Profilux. Even though it doesn't tell you any results just click on jt to see results and you will see it
You can see the how the logo looks at the top of my screen
http://img.tapatalk.com/d/13/03/16/pa8azeze.jpg
Doggydoc
Printable View
Just go on search and type Profilux. Even though it doesn't tell you any results just click on jt to see results and you will see it
You can see the how the logo looks at the top of my screen
http://img.tapatalk.com/d/13/03/16/pa8azeze.jpg
Doggydoc
search for "GHL ProfiLux" - it is there!
please, let us all get some experience with the app in the "field" and give us a chance to react on the issues which may happen
Matthias,
Is there a default connection timeout setting defined as I'm unable to connect via the App but with the same details have no issue with either ProfiluxControl and the Web interface (Verified web interface on both the same iphone and iPad as the app also). I have an average round trip response time of 12ms (over 1000 ping responses). My Profilux is connected via an AirPort Express (Also wondering if anyone else has this type of connectivity and its working?)
Looking forward to being able to use the app.
Mathias so far everything works perfect. Sometimes connection times out but I am sure it has to do with speed of connection.
Only thing is that I cannot load sensor graphs.
Again THANK YOU VERY MUCH for getting this done.
Doggydoc
OK, my opinions after few hours :-)
1. After install, when you are setting language and you've set english and clicked "I agree", the app is going to be blank page. You have to kill app and rerun again.
2. In Alert tab - when all statuses on profilux are OK the alert tab is empty ( without any information ). There should be statuses or information about Alarm status: OK
3. App is disconnected time to time. When I'm connecting by Internet IP or by LAN IP. When app is hang up (while you're changing lighting manually for example ) the manual option is still active on profilux ! - It's wrong.
4. App is reloading data so slowly in 100MBit network LAN with Wifi type N ( it's not a problem with speed, at home I have 1Gbit network, profilux is connected 100Mbit, PC 1Gbit and iPhone/Ipad Wifi type N )
The problem with disconnecting is global, the same situation is with App on windows ( when I connection by Internet or LAN ).
For 100% sure the LAN topology is correct, there is no any lags, long ping or something like that.
thanks for your feedbackQuote:
Originally Posted by smithpl
-> we are working on the performance
-> also on the bugs being reported
the graphs should work, at least they do it here on my iPhoneQuote:
Originally Posted by doggydoc10
did you enable the measurement recording for the probes in question? see measurement settings in ProfiLuxControl
This words are only for help you with develop new app :-)
In my opinion there are problems with multitasking and timeouts in application and webserver Profilux.
The app should get data from profilux in background and not all data in one package.
Now, when application refresh data from profilux, the screen is going to be frozen. It's not good idea for user friendly app :-).
I think is better to request data from profilux in several small packages in background ( 1 package alarms, 1 pkg sensors, 1 pkg light etc )
This data can be requested over and over when app is active on iOS.
In application there is too short timeout for login and for get data from profilux.
I've tested connecting to profilux using Wifi or 3G and it's correct but when I've disabled 3G it wasn't possibility login to profilux. :-(
Second problem:
In Lighting section ther is name Illumina.1.... Illumina.4
I think is better to put there user's name of channel which user set in description field by PC application.
For example:
Illum.1 (Blue T5)
Illum.1 (Blue LED)
etc...
Third problem:
After setting up your connection to profilux, each connection should be protected by 4-digit code. The same as in application on the PC.
Let us remember that our Ipads and iPhones are using by our kids too :-)
that's exactly what we doQuote:
Originally Posted by smithpl
but we are going to make the data "portions" even smaller
I've found in app store :) https://itunes.apple.com/es/app/ghl-...613103784?mt=8
Matthias,
Can we have the application with more languages? (Android and iPhone)
Regards
Will the app work with profilux 3.1A with lan card installed (connected to airport express)
No.Quote:
Will the app work with profilux 3.1A
I have the same issue, just keeps saying 'no response' .Quote:
Originally Posted by JasonK
No thanks, fine as is.Quote:
After setting up your connection to profilux, each connection should be protected by 4-digit code.
Same issue here. Can try via wireless network setting or by over the internet and it just won't connect. Works fine in safari browser though.Quote:
Originally Posted by rattters
Same problem that some peoples already reported. Cant connect with LAN or WAN Ip. I have no problem with safari browser and can ping the device from my iPhone but the App say : No response from the device.
I am also using a bridge since my router with the modem is not located in the living room where the tank is located.
PLC also work from my workstations before and after my bridge.
I am forwarding port 80 from my modem router.
Not sure what else I can try since I can not connect the Profilux directly to the router with the modem.
same here . even on wifi i am not able to connect ....Quote:
Originally Posted by Mike991
the next bug to correct:
1. app rotating does not work on iphone and ipad 4. When I rotate device horizontal-vertical, app is in vertical position only.
Sent from my iPad 4G using Tapatalk HD
Experiencing the same issue. Momentarily displays 'Connecting' then 'Retrieving Data' then 'No Response from the device'. I think it's hitting the Profilux because It returns 'No Response from the device (Wrong Password)' if I purposely enter the incorrect password.Quote:
Originally Posted by rattters
thanks for all your feedback
-> I see some work for next week for my developers
I think when we improved the connection speed most of the mentioned problems will disappear
The next one :-)
1. All the time, when I open app, I see terms for use and I have to click on Yes.
I think, when user click once, the app should remember about it constantly.
2. I'm starting app. I'm connecting app with profilux.
After using, I move app in backround using home button.
When I reopen app I can not connect to profilux again.
I have to kill app and start it again.
Option:
If possible it would be nice if you could setup a "admin" or "guest" profile.... Now only a admin is possible but then all features to manual changes are available.... as in guest its view only.
Also I would perfume to have the external IP address not viewable in the profile connection listing.....
To pimp up the app. a little why don't you allow image uploads of Aquarium instead of texts profile listing.
I'm missing info on connected tunze or vortech, eheim? .... If its controllable true ProfiluxControl its should be visible/controllable in app.
must say that for a first release its already a good app..... and for free?
I agree. I think it's great for a first run.
Would like to be able to connect cameras to the app itself to view live video within the app.
Doggydoc
That would be awesome !!Quote:
Originally Posted by doggydoc10
Just wanted to let everyone know that it's now working and not having firmware 5.15 was the issue.Quote:
Originally Posted by Mike991
Working great and I love it! :)
Is iOS/Adnroid app will be work with Profilux plus II with ethernet module or with Profilux plus II ex?
no because the internal P3-webserver is usedQuote:
Originally Posted by smithpl