Mitras FW

I already have done the manual installation of driver as posted on prev entry.

Ok, than can you post me a screenshot of your device manager with opened COM & LPT?

Driver WAS installed manually before opening this thread

If your plugging into a USB 3.0 try plugging into USB 2.0 instead, that's the only way I can get it to work.

And how do I determine which USB is 2 or 3?

See if you have a 3.0 controller in Device Manager under the USB controllers. If not, then moot point. If you do you can try different ports. I know USB is supposed to support legacy, but on my computer I have four ports, one is 2.0 and it's the only USB port that allows me to connect to Mitras or Profilux to update firmware.

Thank you very much. Will try that tonight and will provide screenshots as needed.
Thank you very much

Quote:

---

And how do I determine which USB is 2 or 3?

---

USB 3.0 ports usually have a blue plastic connector instead of the black ones of USB 1.1/2.0

Of course, it´s not a requirement for USB 3.0 :cool: but a used way to differ between the port standards

Quote:

---

Originally Posted by Halfmoon

See if you have a 3.0 controller in Device Manager under the USB controllers. If not, then moot point. If you do you can try different ports. I know USB is supposed to support legacy, but on my computer I have four ports, one is 2.0 and it's the only USB port that allows me to connect to Mitras or Profilux to update firmware.

---

Under USB controllers this is what I have. I believe they are 2.0
http://img.tapatalk.com/d/14/07/23/5anytu5u.jpg

Quote:

---

Originally Posted by Artur

Ok, than can you post me a screenshot of your device manager with opened COM & LPT?

---

Here you go

http://img.tapatalk.com/d/14/07/23/ahunupep.jpg