everything else works including my digital power bars (plugged into the S ports)....thank god for them!
I just can't get the PAB bars communicating.
Printable View
everything else works including my digital power bars (plugged into the S ports)....thank god for them!
I just can't get the PAB bars communicating.
could you assign the PAB devices (again) please ?
before that reset the PAB system
all to be done on the ProfiLux under menu system->PAB
I did it again, still "No Devices Found"....even after the re-set.Quote:
Originally Posted by Matthias
The funny thing is, I don't have a PAB warning light error as well
is the wirnig OK?
did you try the other PAB port?
Yup, just tried again. And on different PAB powerbars.
Still "No Devices Found"
I just noticed that the power bar green light is flashing.....is this normal?
yes, this indicates that here has been no communication for more than 1 minute
we can't do much more, even on the telephone
you said
- wires are OK (did you doublecheck it and swapped the order of the powerbars and used other cables?)
- tried all PAB ports (really both ProfiLux and both powerbar sockets in all combinations?)
- reset PAB and assigned it again?
if this points are all correct then PAB must work - if not there is something broken or the firmware is not matching - powerbar firmware? profiLux firmware? Always use the newest
I will try it all again, but I don't think its going to work. Seems like the PAB function on the actual profilux is broken.
I will update the latest FW and see if it helps
Quote:
Originally Posted by Matthias
- I have swapped out wires and powerbars, done the system re-set, re-start and tried to assign but "No devices Found"
- Tried a bunch of combinations of the powerbars/powerbar slots and the 2 PAB slots at the back of the Profiux
- Can't assign the PAB devices, because they can not be found.
I am now running the newest FW. I don't know what the FW is on the PAB powerbars but it should be 104