Hi,
I've updated to 6.03 firmware, as it was newest available.
The latests control is 6.0.2.1
I thought it should work, but it seems it's not.
How I can get control software to work with 6.03?
Also it's weird, but web server also is not responding (port is closed), I'm stuck...
How have you performed an update with a not-working connection? With the emergency update?Quote:
I've updated to 6.03 firmware, as it was newest available.
What have you set and how have you tried to connect?
It isQuote:
The latests control is 6.0.2.1
You may tell us how you tried it (LAN/USB/RS232) and check the settings. Webserver is only available via LAN and only if the LAN settings are correct.Quote:
I thought it should work, but it seems it's not.
How I can get control software to work with 6.03?
Best is to set a fixed IP in the subnet of your router, outside the DHCP range.
You write it don't work... what do you mean with "it"?
We can't help without some basic information.
If you update the firmware, you have to adjust alls your ProfiLux settings again, because the ProfiLux is reset to factory defaults at an update from 5.xx to 6.xx.
Or you could import your before saved settings.
Thanks for quick replies.
I do saved my settings and performed update, but can't connect now, after update, see attached image explaining my worries.
1. All was working on 5171 version (performed update myself before), I mean USB, Lan.
2. Web server was behaving strange but iPhone was fine, so I was okay
3. Updated via usb to 603 and no connection via lan/usb. No errors, it just opens dialog about no connection and options to adjust connection settings.
Attachment 5292
Managed to log in finally! Just disconnected everything, rebooted computer, router, profilux...
But, got another problem - all settings/sensors data restored, but if I try to export settings to my computer, see attached error comes up.
Attachment 5293