Moon-L led stick

Can anyone tell me how I should connect profiluxmoon-L led stick. I own a ProfiLux 3 ex. with the latest firmware.
I can not get it working.
Must it be connected to L1/L2 or L3/L4 .I have two Moon-L stick to be connected.

How to configure in profilux controle.

Factory-provided the Moon-Stick reacts to the channels L1, L3, L5...
But you can also switch the channel in the software if you like.

If both L-ports are free and you have no Y-cable, then simply connect
each stick to one port each.
One will react to L1, the other to L3.

Then you will have to set an illumination as function for channel L1 and L3 under System/ 1-10-V-interfaces.
If they shall work parallely, then you can use the same illumination.

Then program your dimming course under illumination/ Illumination xy (the one you assigned to L1 and L3).

okay thank you I get it now.

The channels L2 and L4 are not used ????? The moon L led stick has two colors bleu and white leds.

No, blue and white are controlled via one channel.