Setting up the WLAN card

Hello all,

I bought a WLAN module some time ago but when trying to make it work following the manual instructions I do not get the same response from the system as suggested in the documents.

http://support.aquariumcomputer.com/...N_WLAN_eng.pdf

http://support.aquariumcomputer.com/...d%20Router.pdf


I have Profilux Plus II with the firmware 5.14 (13.07.2012) and I use the Profilux Control 5.1.4.3 software.
Serial number: 1012092002

If I try to set up the IP directly on the Profilux, after "Device address <1>" I am asked whether I want to "save" and it goes out of the menu (instead of moving to the "router" question).

If I try from the P.Control SW, "System" / "WLAN" / " Configuration" I can modify the IP address, then "save" but in the general menu does not allow to "save" therefore I assume the unit does not get the configuration.

It does seem a firmware problem, but maybe I am doing something wrong.

Can you please help me to find the way to configure the WLAN module?

Thanks in advance!
Alex

Hi everyone,

Does anyone knows how to fix this problem?

Shall I update the report with screenshots?


Thanks in advance for your advice.

Alex

Hallo aus Deutschland,

ein Tipp: (http://forum.aquariumcomputer.com/sh...9122#post39122)


DeviceInstaller für Windows herunterladen geht hier:
http://ltxfaq.custhelp.com/app/answe...UGVBLV9CYWw%3D

Der wird zum Betrieb der PLM-WLAN aber eigentlich NICHT BENÖTIGT! Einzig zum FW-Update habe ich Ihn mal gebraucht.http://forum.aquariumcomputer.com/sh...9635#post19635
Die könnte z.B. hier heruntergeladen werden:
http://ltxfaq.custhelp.com/app/answe...66/kw/WiPort-G http://ltxfaq.custhelp.com/app/answers/detail/a_id/1213

Viele Grüße aus Marl