profilux plus II and dosering pumps

i have a profilux plus ii and 4 dosers. i dont have a way to connect them to a pc, but i need to program the 4 dosers to dose food for me.
i cant find any manual to guide me to set that up.
any help will be great.
thanks

Quote:

---

i cant find any manual to guide me to set that up.

---

It´s described in the Programming guide for the Profilux at "4.3 Timer"

ok, thanks, so how do i know which timer i should edit?(1-12) or which port on the back i should plug the dosers into? L1-L4 or S1-S4?

Quote:

---

so how do i know which timer i should edit?(1-12)

---

Again I recommend to read the manual:

Quote:

---

The sockets which shall react to the switching processes can be assigned as described under 7.3 Switching output.

---

Or short: You can use any, but you have to assign it to the ports you chose for the dosers -you have to use 1-4

Quote:

---

or which port on the back i should plug the dosers into? L1-L4 or S1-S4?

---

S1-S4 is the right choice due L1-L2 and L3-L4 are dimming ports, not for switching.

as i read the manual 4.3 and the 7.3, i still dont see how to assign the S1-S4 as dosing pump.
here's how i set up
i connected the dosing pump to S1-S4
i click the clock button, it asked which one time to edit. i pick 1-4 programs the way i wanted. but i dont see how to assign the S1-S4 as dosing pump.

Quote:

---

but i dont see how to assign the S1-S4 as dosing pump.

---

You have programmed timer 1-4 as dosing. Now assign Timer 1-4 to socket 1-4 as described.

Quote:

---

After selection of the socket, the function is to be set first.
Timer afterwards the Number of the timer is to be selected (1 to 8)
This switching output is controlled by the corresponding timer.

---

So set Socket 1-4 to Timer 1-4 and all will be o.k.