Printable View
How can I connect 4 Meanwell 60-48D (dimmable) led drivers to Profilux 3.
Specifically:
1. How do I connect the dimming wires to the L ports?
2. Do I need to connect the drivers main power supply to switched ports on Profilux?
3. How many of these drivers can I connect to one L port?
These questions may have been answered before but I am still a little confused and would appreciate clarifications.
Thanks,
You can connect 1-10V directly to PL here are the Information to coonect with the right pins.
Page2
Control line from
aquarium computer
6 5 4 3 2 1
You can connect 2 drivers/L-Port
Pin1 = PL-Dimming 1 + to 1st driver 1-10V+
Pin3= GND or 1-10V - for both drivers
Pin5 = PL-Dimming 2 + to 2nd driver 1-10V+
Thank you, now it is clear.
How many PNL60-48D can I connect to each dimming channel?
I'm not sure but I think the L-ports operate at 10 or 20 mA. I did not found Informations about this problem on the Meanwell Webpage. I would max. 1 driver per port dimmable take. Another thing is, you have no power off function.
Thank you.
its idd around 2 per port , 3 would be pushing it ( if you search on the forum you will find it )