New: leakage-sensor !

Printable View

09.12.2011, 17:21
Matthias

1 Attachment(s)

New: leakage-sensor !

Here it is - the leakage-sensor for ProfiLux !

Attachment 2086

more details:

http://www.aquariumcomputer.com/Syst...cessories.html
09.12.2011, 20:33
Blahenazo

nice piece of kit.

BUT I'm not gonna buy it. IMHO a FAIL on the floater connectors :(((((
I need my floater ports for my floaters.
09.12.2011, 21:44
almost

Thats very interesting.

You put it on the floor just under the aquarium, and if 2 of the 80 contacts come in contact with water, then this is translated as a leakage?
So in this case, an email can be send or a swith can be turned on/off. Correct?

Will it work with a salt water?
10.12.2011, 07:57
richard.mayo

It will only work with salt water as it has to be conductive.

I like it, i think its a great idea

Well done GHL
10.12.2011, 11:31
Wirus

Quote:

It will only work with salt water as it has to be conductive.

Nonsense. It will work with fresh- and salt water. Only exception is osmosis water
10.12.2011, 21:34
richard.mayo

Quote:

Originally Posted by Wirus

Nonsense. It will work with fresh- and salt water. Only exception is osmosis water

Sorry i guess i misunderstood
12.12.2011, 16:23
BigAl07

Pardon my ignorance but I'm not following the difference between "Fresh" water and "Osmosis" water here.
12.12.2011, 16:43
Wirus
Quote:

but I'm not following the difference between "Fresh" water and "Osmosis" water here.
- Fresh water is what you get from the pipe - Conductance is between 50 and 1000 µS/cm (soft to hard water)
- Osmosis water is what you get from a reverse osmosis filter - Conductance is lower that 10 µS/cm down to 0.0...1 µS/cm
The leakage sensor measures the conductance of air (if it´s dry) or the water (if there is a leakage). The conductance is the reciprocal of the resistance per cm.

If the water is too clean, it has very low conductance which means it has very hight resistance which also means it is an insulator like air. That´s the reason why a conductive probe can not recognize osmosis water.
12.12.2011, 16:47
BigAl07

Ahh ok I see now. All of my "Fresh Water" comes through the RO/DI so it wouldn't detect a leak in my ATO reservoir but would it the tank were leaking.

Much more clear understanding now.
15.12.2011, 20:54
aqua_digital

we now need PLM-Level expansion PCB to be released :)

I see www.reefbuilders.com has posted this, please all go and give the product the thumbs up ;)