Hi to all. I try to controll light on digital powerbar,turning on and off but never dimming.Do i conect cable to L2 or S2.Thank you:(:(:(:(
Printable View
Hi to all. I try to controll light on digital powerbar,turning on and off but never dimming.Do i conect cable to L2 or S2.Thank you:(:(:(:(
What kind of light? MH or T5 are they dimmable?
No not MH regular PClight for Oceanic biocube i think 2x16WQuote:
Originally Posted by kidney514
I think that these are not dimmable, not sure!
Thank you i try to buy something dimmeble.Just explane PLS how to conect.L1L2 port and setup in the menu or S1 S2 and setup in the menu.I use 6socket digital powerbar.Thank you for your time.Quote:
Originally Posted by kidney514
Powerbars must always be connected to S-ports! Otherwise ProfiLux may be destroyed!
The L-ports are 1-10V interfaces which are used to control dimmable lamps or current pumps.
This is all mentioned in the manual and additionally in a warning leaflet which comes with every ProfiLux.
Thank you for replay,i conected to S1 and turning ON and OFF,but never dimm,i will look for that dimmeble interface.If i conect to dimmeble interface,dont need powerbar? Thank you,but look like am to old for to that.Quote:
Originally Posted by Matthias
Yes, in order to dim/control a dimmable lamp you don't need the Powerbar. Just connect it to one of the L-ports of the 1-10V-interfaces. That's all.
I see potential confusion here.
To dim a lamp you need "dimmable ballasts"
A dimmable ballast has a 1-10V interface, this connects to one of your L ports.
The AC power from the dimmable ballast can either come from the power bar OR you can use the EVG-AP card.
Without dimmable ballasts you will not dim your lamp.
Thank you for helping out now i start to feel what to do.Thank you .