Printable View
Hallo
I have seen that the new profilux mini have 2 connections for Tunze pumps. The 2 connections can be split in to 2 more connections. So 2 channels with 2 pumps. I want to connect a Tunze 6095 to channel 1 and a 6095 + a wavebox to channel 2. Can I use the 7092 between the wavebox and channel 2 ?
If I purchased a powerbar, are there any connections for tunze pumps on the powerbar ? Then I could connect the wavebox directly to the powerbar.
Best regards
kasper J.
Hi
yes, the ProfiLux Mini has 4x 1-10V interfaces which can be used for stream pumps, e.g. your Tunze.
But I don't know what you mean withWhy not just use channel 3 for it?Quote:
+ a wavebox to channel 2. Can I use the 7092 between the wavebox and channel 2 ?
And why do you want to switch the wavebox via our powerbar when you control it already over a 1-10V interface?
Hallo
It is because on the picture of the profilux mini, it look like that it only has 2 connecters for pumps. I can read that it has 4 but only 2 are shown. But can it control 4 pumps in 4 individuel ways ?
That me give an example. Pump 1 i on for 1 hour. After one hour pump 1 is off and pump 2 is on and the wave box turn on as well but it performing a different funktion, making waves.
Do it then have to split one of the connecters or am I missing something ?
Best regards
Kasper j.
Hallo Kasper j.
2 connectors 4 Channels. You can use a y Adaper 2 Cable Tunze 1 an 1 Cable Tunze 2
Connect the Y Adapter to the connector L1/L2 and plug the Tunze1 and Tunze2 to the y-Adapter. The other Tunze 1 Cable is for the connector L3/L4
Regards Pit
Okay. One final question :-) If I whant to use 2 mitras 6200/7000 lamps, can they be connected to the profilux mini like the mitras lightbar or is it better til buy 1 6200/7000 master and 1 6200/7000 slave and use the mitras lamp controller ?
Best regards
Kasper J.
The Mitras LX6/7 dont have the Mitras Lightbar Interface, they communicate wireless
-> ProfiLux Mini/Light and Mitras LX6/7 can't be connected