PDA

View Full Version : Explain profilux differences



Math020
24.08.2014, 17:56
Can someone explaine me the differences between

Profilux 3 3ex 3.1n 3.1a

Thanks guys

Gunther
24.08.2014, 21:27
See https://www.aquariumcomputer.com/en-GB/products-shop/profilux-controllers#overview

Remark: The PL3 is similar to the 3.1N (with slight differences) but due it´s not available anymore, it´s not listed.

Math020
26.08.2014, 01:50
Not sure to understand the differences but thanks gunther for your reply

Gunther
26.08.2014, 07:14
It´s not so difficult.

The main difference you have to chose between the 3.1A and 3.1N is the build-in Webserver with all its functionallity.
One of this functionallities is the access via Android/iOS-App - it´s only possible for the 3.1N but not for the 3.1A
It´s not possible to upgrade a 3.1A to a 3.1N or to add the webserver/app functionallity afterwards in any other way so this decission is final.
Only way to get the web functionallity for a 3.1A is to replace it by an 3.1N

So if you want to have access from outside your home via web or smartphone app, the 3.1N is mandatory.

The difference between eX and not eX version are additional inputs for Redox, conductivity, light and level control.
However, this decission is not final due it´s possible to upgrade a 3.1A/N to 3.1A/N eX with an extension kit:
https://www.aquariumcomputer.com/en-GB/products-shop/profilux-controllers/1567/371/profilux-3-1/extended-upgrade-kit-fuer-profilux-3-1a-3-1n-detail

All other additional functionallity you can see in the sheet is not that important for single tanks (in my opinion).