Profilux Touch - Night mode

[Robert Lewis]

Hi

Before I updated to the touch and the profilux to the latest firmware I was able to dim the touch overnight, has this now been removed with the new firmware?

Thanks

Robert

[Matthias]

no, it works still as it should, just tested

please check the corresponding settings in your Touch

[reeferqq]

Hi Matthias,

Where can it be set .... because I just tried on yesterday but couldn't find.

[Robert Lewis]

Mmm .. just looked again under the Touch settings & display settings in GCC V1055 and couldn't see it.

Using firmware V6.10 for profilux and V1.05 for the touch.

[Artur]

Please activate the expert mode under "View" in the top menubar.

6325

[Robert Lewis]

Gotcha ..

Thanks Atur, appreciate your help.

[Gael]

I also have problem with my touch.
I setup Bright to 50% and Dark to 0% and Dark from 20H to 07H.

Sometime in the Dark time, if i touch the screen, it don't light on :-(

I successfully use these settings on Profilux display and Mitras LX display and hope on touch.

Thank

[Artur]

We will check this.

[Gael]

Any news?
Thank

[Artur]

Hello,

we could not reproduce your problem.
Is there any pattern when the touch don't light on?

[Gael]

Hello,

{Profilux Display}:
Settings: Bright:5% Dark:0% From:20:00:00 To:07:00:00
Result:
->Display is 5% from 07h to 20h and 0% from 20h to 07h
->When i press a button between 07h-20h it go from 5% to 100% and return to 5% few seconds after not touching button
->When i press a button between 20h-07h it go from 0% to 100% and return to 0% few seconds after not touching button
->All its OK

{Profilux Touch}:
Settings: Bright:9% Dark:0% From:20:00:00 To:07:00:00
Result:
->SOMETIMES Display is 9% from 07h to 20h BUT many time Display is 100% from 07h to 20h need to revalidate/change time or the touch not go to 9% Also screen picture background is not updated from "ProfiLux Touch blue background" and no sensors display, need to touch the screen) and 0% from 20h to 07h Sometime need to revalidate/change time or the touch not go to Dark…
->When i touch it between 07h-20h it NOT go from 9% to 100%
->When i touch it between 20h-07h it NOT go from 0% to 100% it go from 0% to 9% (and sometime it left at 0%) and return to 0% few seconds after not touching it

Thank

[Artur]

Thank you for your help, we will check this as fast as possible.

[Gael]

Also Alarm is setting to off on touch.
If i push alarm icon to enable it, touch reboot and go to 100% bright.

Also when alarm screen picture background is not fully updated from "ProfiLux Touch blue background":
7189

[Gael]

Hi,

Any news?

Thank :-)

[Artur]

Hello,

yes we could reproduce your problem and it will be fixed in one of the next firmware updates.

[Gael]

Hello,

When can we hope a fix? :-)

Thank

[Gael]

it will be fixed in one of the next firmware updates.

Any news?

Thank

[Artur]

It is on the ToDo-list and we will announce it.