View Full Version : Profilux Touch - Night mode
Robert Lewis
28.07.2014, 01:20
Hi
Before I updated to the touch and the profilux to the latest firmware I was able to dim the touch overnight, has this now been removed with the new firmware?
Thanks
Robert
Matthias
28.07.2014, 08:47
no, it works still as it should, just tested
please check the corresponding settings in your Touch
reeferqq
28.07.2014, 11:30
Hi Matthias,
Where can it be set .... because I just tried on yesterday but couldn't find.
Robert Lewis
28.07.2014, 11:47
Mmm .. just looked again under the Touch settings & display settings in GCC V1055 and couldn't see it.
Using firmware V6.10 for profilux and V1.05 for the touch.
Please activate the expert mode under "View" in the top menubar.
6325
Robert Lewis
28.07.2014, 12:43
Gotcha ..
Thanks Atur, appreciate your help.
I also have problem with my touch.
I setup Bright to 50% and Dark to 0% and Dark from 20H to 07H.
Sometime in the Dark time, if i touch the screen, it don't light on :-(
I successfully use these settings on Profilux display and Mitras LX display and hope on touch.
Thank
Hello,
we could not reproduce your problem.
Is there any pattern when the touch don't light on?
Hello,
{Profilux Display}:
Settings: Bright:5% Dark:0% From:20:00:00 To:07:00:00
Result:
->Display is 5% from 07h to 20h and 0% from 20h to 07h
->When i press a button between 07h-20h it go from 5% to 100% and return to 5% few seconds after not touching button
->When i press a button between 20h-07h it go from 0% to 100% and return to 0% few seconds after not touching button
->All its OK
{Profilux Touch}:
Settings: Bright:9% Dark:0% From:20:00:00 To:07:00:00
Result:
->SOMETIMES Display is 9% from 07h to 20h BUT many time Display is 100% from 07h to 20h need to revalidate/change time or the touch not go to 9% Also screen picture background is not updated from "ProfiLux Touch blue background" and no sensors display, need to touch the screen) and 0% from 20h to 07h Sometime need to revalidate/change time or the touch not go to Dark…
->When i touch it between 07h-20h it NOT go from 9% to 100%
->When i touch it between 20h-07h it NOT go from 0% to 100% it go from 0% to 9% (and sometime it left at 0%) and return to 0% few seconds after not touching it
Thank
Thank you for your help, we will check this as fast as possible.
Also Alarm is setting to off on touch.
If i push alarm icon to enable it, touch reboot and go to 100% bright.
Also when alarm screen picture background is not fully updated from "ProfiLux Touch blue background":
7189
Hello,
yes we could reproduce your problem and it will be fixed in one of the next firmware updates.
Hello,
When can we hope a fix? :-)
Thank
it will be fixed in one of the next firmware updates.
Any news?
Thank
It is on the ToDo-list and we will announce it.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.