Setting up Auto Top Off

[stretchlong]

Hi all

I'm using an Optical sensor and I'm not sure if it needs calibrating or how to set the ATO correctly... Can anyone give me a little guide on how to do it?

I've set it up and when I take the sensor out of the water there is a dash next to it (meaning it is working) when I put it in the water there is a cross (indicating it is not in operation. However, when the sensor is on, the plug socket isn't activating I know that the socket is functioning ok because when I put it on 'always on' the pump starts...

What am I not doing??

Thanks for any help/info

Gav :)

[Coralleida]

Sensor 1 options:

Always ATO? -> Yes
Sensor 1 -> Auto Top Off
Reaction time +/- -> 10 sec
Max on time -> it depends on the water pump, more or less 30 seconds
Function socket selected -> Water 1

This means: after 10 seconds you see "-" on the diagnostic screen, it has to start the socket selected before

[stretchlong]

I had it on "is only active with timer 7"

What you showed me has sorted it...


Thank you

Gav :)