Techmik
12.04.2014, 19:43
Hi, I have a Profilux Plus II that has a possible firmware problem.
I have tried the Flash firmware utility which installed correctly, on power up the screen displays 'check ok' up to the Profilux logo.
However there is no key functionality at all, when connected to Profilux control there are no Temperature or pH sensor tabs available in 'Probe/sensor controls'
Furthermore the serial number for the unit reads as -1 which is incorrect.
I have installed Firmware version 5.15.
Can you suggest what might be the problem and how I can fix it?
Many thanks
Mick
I have tried the Flash firmware utility which installed correctly, on power up the screen displays 'check ok' up to the Profilux logo.
However there is no key functionality at all, when connected to Profilux control there are no Temperature or pH sensor tabs available in 'Probe/sensor controls'
Furthermore the serial number for the unit reads as -1 which is incorrect.
I have installed Firmware version 5.15.
Can you suggest what might be the problem and how I can fix it?
Many thanks
Mick