View Full Version : Driver blank differences
Hi guys
Can you tell me what the difference is between the EVG-AP-1F and EVG-AP-2F please?
Thanks
Matt
Coralleida
23.09.2009, 23:39
EVG-AP-1F: Driver for 1 L channel
EVG-AP-2F: Dirver for two L channels
Thanks Coralleida
One more question....what are the maximum currents I can pull through the relays on EVG-AP-2F and EVG-AP-2F-HIC?
Matthias
25.09.2009, 19:12
10 A each channel both versions continious current
but the difference is max. allowed inrush current (current during switching on):
100 A standard vs. 160 A HIC (one ballast draws between 40 ... 60 A inrush current)
Matthias
I assume the inrush currents you've stated above are also per channel?
Matthias
01.10.2009, 10:06
yes, per channel
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.